Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5363_L_R_VT-VY_SERIES_1
PH 5363 VT-VY Series 1 Commodore/ WH-WK Series 1 Statesman Gen III Competition Header
PH 5363 VT-VY Series 1 Commodore/ WH-WK Series 1 Statesman Gen III Competition Header.
BrandPacemaker
Category: Extractors and headers
RRP $1362.53 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5363_L_R_VT-VY_SERIES_1
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The Pacemaker PH5363_L_R_VT-VY_SERIES_1 is a left-and-right competition header set listed to fit the Holden Commodore. Built for the Series 1 Gen III V8, it's a competition-spec extractor that replaces the factory cast manifolds as a matched pair.
What does a competition header set change?
A competition header replaces the heavy factory cast manifolds with tube extractors built for performance builds. The PH5363_L_R_VT-VY_SERIES_1 is supplied as a left-and-right pair for the Holden Commodore, each side routing its bank through individual runners to a collector. We publish no flow, power or sound figures and won't quote any — it's the manifold design that changes.
Will it suit my Holden Commodore?
It's listed to fit the Holden Commodore in this Series 1 application. Header fitment depends on the engine and exactly what's on the car, so we confirm the PH5363_L_R_VT-VY_SERIES_1 against your build before ordering. Send us the details and we'll check the runner and collector clearances.
Is it road legal?
This is a competition header — a manifold replacement, not a catalytic converter or muffler. Competition-spec parts and the rest of the system's configuration both bear on NSW road compliance, and we go through that with you. No compliance approval is published by the supplier and we won't imply one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker competition headers across the Illawarra. We thread the left and right sets in around the V8, check steering and crossmember clearance, fit fresh gaskets and seal the collector joints. RRP is listed at 1362.53 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this supplied as a pair?
- Yes — the PH5363_L_R_VT-VY_SERIES_1 is a left-and-right competition header set for the Holden Commodore.
- Is it road legal?
- It's a competition header, a manifold replacement. Road compliance depends on the rest of the system and NSW requirements — we go through that with you. No approval is published by the supplier.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.