Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5363_L_R_VY_Series_2
PH 5363 VY Series II Commodore/ WK Series II Statesman Gen III Competition Header
Pacemaker PH 5363 VY Series II Commodore/ WK Series II Statesman Gen III Competition Header.
BrandPacemaker
Category: Extractors and headers
RRP $1461.67 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5363_L_R_VY_Series_2
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY WH WK
- Stock status
- Confirmed on order
The Pacemaker PH5363 (VY Series II) is a Gen III competition header set listed to fit the VY Series II Commodore and the WK Series II Statesman. As an L/R pair it replaces the factory cast manifolds on both banks of the Holden V8.
What is a competition header and where does it sit?
A header is a tubular replacement for the factory cast exhaust manifold, giving each cylinder its own tuned-length runner before the gas merges. Pacemaker badges this one as a competition header, which signals it's the more aggressive end of the range rather than a mild bolt-on. It mounts where the cast manifolds were, feeding into the rest of the system behind it. This is the VY Series II listing in the PH5363 family.
Which Holdens does this PH5363 cover?
This part is listed to the VY Series II Commodore and the WK Series II Statesman with the Gen III engine. It's supplied as a left-and-right pair to suit both cylinder banks. There are separate PH5363 listings for the VZ-era cars, so we confirm your exact model and series against this one before ordering.
Will it suit my VY Series II or WK?
It's listed to fit the VY Series II Commodore and WK Series II Statesman. Pacemaker doesn't publish a primary tube diameter or a material grade for this listing, so we won't state either — if those details matter to your build, the workshop can confirm them with the part in hand. Send your model and we'll match it.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker headers in-house across the Illawarra. We remove the cast manifolds, fit the L/R header pair, and check clearance to the steering, crossmember and starter on the Gen III install before mating it to the system behind.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PH5363 (VY Series II) a left-and-right pair?
- Yes — it's supplied as an L/R set to fit both banks of the Gen III V8 in the listed VY Series II Commodore and WK Series II Statesman.
- Does it fit a VZ Commodore?
- This listing is for the VY Series II. The VZ cars have their own PH5363 part numbers — confirm your series with the workshop.
- What primary tube size is it?
- Pacemaker doesn't publish a primary tube diameter for this listing, so we won't quote one. We can confirm it with the part in hand at the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.