Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5367_L_R_VZ_6L
PH 5367 VZ Commodore/ WL Statesman LS2 6L Tri-Y
PH 5367 VZ Commodore/ WL Statesman LS2 6L Tri-Y.
BrandPacemaker
Category: Extractors and headers
RRP $1444.03 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5367_L_R_VZ_6L
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ WL
- Stock status
- Confirmed on order
The Pacemaker PH5367_L_R_VZ_6L is a Tri-Y extractor set listed to fit the Holden VZ Commodore and WL Statesman with the LS2 6L V8. It's the header pair supplied by Pacemaker, listed at $1,444.03.
What is the PH5367_L_R_VZ_6L?
This is a left-and-right Tri-Y extractor (header) set listed for the Holden VZ Commodore and WL Statesman fitted with the LS2 6L V8. Extractors replace the cast factory exhaust manifolds with tuned tubing off the cylinder heads. This is the header pair on its own; the rest of the exhaust is a separate item, and the exact contents are confirmed by the workshop.
What's a Tri-Y header and what does it change?
A Tri-Y header merges the cylinder runners in two stages — pairs first, then into the collector — rather than dumping all of them into one junction. The aim is to use exhaust pulse timing to help scavenging across a wider rev range. Swapping the cast manifolds for this reduces back-pressure and changes the note compared with stock. The trade-offs are more under-bonnet heat and a louder, different sound, and the outcome depends on the rest of the exhaust behind it.
Will it suit my Commodore or Statesman?
It's listed to fit the Holden VZ Commodore and WL Statesman with the LS2 6L V8. Header fitment is engine- and body-specific, so confirm your car runs the LS2 6L and check your exact model with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Tri-Y extractors like this across the Illawarra. We'll confirm the set suits your LS2 6L VZ Commodore or WL Statesman, check gaskets and clearances, and book the install once verified.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PH5367_L_R_VZ_6L fit?
- It's listed for the Holden VZ Commodore and WL Statesman with the LS2 6L V8. Confirm your exact model with the workshop.
- Is this the full exhaust?
- No — it's the left-and-right Tri-Y extractor pair. The rest of the exhaust is separate, which we can confirm with you.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.