Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5382_L_R
PH 5382 Holden Commodore VE - VF Jul 2006 - Oct 2017 and WM-WN Statesman Aug 2006 - Oct
PH 5382 Holden Commodore VE - VF Jul 2006 - Oct 2017 and WM-WN Statesman Aug 2006 - Oct 2017 6.0 - 6.2 V8 All models Excluding HSV LSA 4 Into 1 1.
BrandPacemaker
Category: Extractors and headers
RRP $1412.13 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5382_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF WM
- Stock status
- Confirmed on order
The Pacemaker PH5382_L_R is a 4in extractor set listed to fit the Holden VE-VF Commodore and WM-WN Statesman 6.0/6.2 V8 from 2006, excluding the HSV LSA models. Supplied by Pacemaker and listed at $1,412.13.
What is the PH5382_L_R?
This is a left-and-right 4in extractor (header) set listed for the Holden VE-VF Commodore and WM-WN Statesman with the 6.0 or 6.2 V8, from 2006. Extractors replace the cast factory exhaust manifolds with tuned tubing off the cylinder heads. This is the header pair on its own; the rest of the exhaust is a separate item, and the exact contents are confirmed by the workshop before fitting.
What does a 4in extractor set do and what does it change?
An extractor, or header, takes over from the standard manifold at the head, with a set for each bank of the V8. The cast manifold is compact but restrictive; the extractor uses separated, smoother tubing — collected at 4in here — to reduce back-pressure and help the engine breathe out. The trade-offs are more under-bonnet heat and a louder, different note compared with stock, and the result depends on the rest of the exhaust behind it.
Will it suit my Commodore or Statesman?
It's listed to fit the VE-VF Commodore and WM-WN Statesman 6.0/6.2 V8, from 2006 — but the listing specifically excludes the HSV LSA models. Confirm your car is a 6.0/6.2 V8 covered by this set, not an HSV LSA, and check your exact build with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractors like this across the Illawarra. We'll confirm the set suits your 6.0/6.2 V8 Commodore or Statesman, check gaskets and clearances, and book the install once the vehicle is verified.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PH5382_L_R fit?
- It's listed for the Holden VE-VF Commodore and WM-WN Statesman 6.0/6.2 V8 from 2006, excluding the HSV LSA models. Confirm your exact build with the workshop.
- Does it fit an HSV LSA car?
- No — the listing specifically excludes the HSV LSA models. We can confirm whether your car is covered before you order.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.