Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5387_L_R
PH 5387 VE-VF 6.0L - LS3 Commodore/Statesman WM-WN TRI-Y
PH 5387 VE-VF 6.0L - LS3 Commodore/Statesman WM-WN TRI-Y (PH5387_L_R) at $1245.72 RRP from Pacemaker. Fast shipping.
BrandPacemaker
Category: Extractors and headers
RRP $1245.72 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5387_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VE VF WM
- Stock status
- Confirmed on order
The Pacemaker PH5387 (L/R) is a tri-Y header pair listed to fit the VE-VF Commodore and WM-WN Statesman with the 6.0L LS3 V8. Its tri-Y merge layout is what sets it apart from a 4-into-1 header.
Tri-Y vs 4-into-1 — what's the difference?
A 4-into-1 merges all four runners at a single collector. A tri-Y instead pairs the runners and merges them in two stages — two Ys feeding a third. On a road-driven V8 that staged merge is generally chosen for a broader spread of pull through the mid-range rather than a single high-rpm peak. The PH5387 is the tri-Y option for these Holdens, supplied as an L/R pair for both banks.
Which cars does this cover?
It's listed to the VE-VF Commodore and WM-WN Statesman with the 6.0L LS3 V8. That spans the sedan-bodied Commodore and the long-wheelbase Statesman, both on the LS3. We confirm your exact car and engine against the listing before ordering, since the LS3 fitment is what this part is keyed to.
Will it suit my LS3 Commodore or Statesman?
It's listed to fit the 6.0L LS3 in the VE-VF Commodore and WM-WN Statesman. Feed data can lag a real car, so we confirm your build first. Pacemaker doesn't publish a primary tube diameter or material grade for this listing, so we won't state either — the workshop can confirm with the part in hand.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men fits Pacemaker tri-Y headers in-house across the Illawarra. We remove the cast manifolds, fit the L/R tri-Y pair to the LS3, and check clearance to the steering, crossmember and starter before joining it to the system behind.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why choose the PH5387 tri-Y over a 4-into-1?
- The tri-Y merges the runners in two stages, which is generally chosen for a broader mid-range character on a road V8. The actual result depends on the rest of the build.
- Does it fit both the Commodore and the Statesman?
- Yes — it's listed to the VE-VF Commodore and WM-WN Statesman with the 6.0L LS3. Confirm your exact car with the workshop.
- Is it a left-and-right pair?
- Yes, it's supplied as an L/R set to suit both banks of the V8.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.