Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5600_L_R
PH 5600 Commodore 5 Ltr E.F.I Motor Engine Swap
PH 5600 Commodore 5 Ltr E.F.I Motor Engine Swap.
BrandPacemaker
Category: Extractors and headers
RRP $1202.80 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5600_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VB VC VH
- Stock status
- Confirmed on order
The Pacemaker PH5600_L_R is an engine-swap extractor set listed for the Holden Commodore with the 5-litre EFI motor. It's the left-and-right header pair for that swap, supplied for fitment where the 5L EFI engine has gone into the Commodore.
What is this part?
It's a left/right extractor (header) set for an engine swap — the PH5600_L_R pair that replaces the cast manifolds when the 5-litre EFI motor is fitted to a Commodore. Pacemaker publishes no diameter, material or year for this listing, so we don't put numbers to it; what's known is the engine and the swap application it's listed for.
Why an engine-swap-specific header?
Swap headers exist because the engine and the body weren't originally paired — so the runner routing has to clear the Commodore's chassis and steering with the 5L EFI sitting in it. That's the whole reason for a dedicated part number rather than a factory-fit header. We treat the listing as the starting point and confirm clearances on the actual car.
Will it suit my Commodore swap, and what does fitting involve?
It's listed for the Holden Commodore 5L EFI engine swap; with no series or year published we confirm fit against your specific build. Oak Flats Muffler Men handles swap header fitment across the Illawarra — we check the runners clear the chassis and steering, then seal each flange for the heat. RRP is listed at 1202.80 AUD; fitting is quoted once we see the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PH5600_L_R fit?
- It's listed for the Holden Commodore 5-litre EFI engine swap, supplied as a left/right header pair. Specs beyond that aren't published, so we confirm fit on the car.
- Are the dimensions published?
- No — Pacemaker lists no diameter or material for this part. We won't guess figures; we confirm the fit physically against your swap.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.