Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPH5700_L_R
PH 5700 Commodore 5 Ltr E.F.I Motor Engine Swap
PH 5700 Commodore 5 Ltr E.F.I Motor Engine Swap (PH5700_L_R) at $1327.48 RRP from Pacemaker. Fast shipping, warranty included.
BrandPacemaker
Category: Extractors and headers
RRP $1327.48 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PH5700_L_R
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VB VC VH
- Stock status
- Confirmed on order
The Pacemaker PH5700_L_R is a left-and-right swap extractor set listed for the Holden Commodore running the 5-litre EFI motor. It's the header pair supplied for that engine-into-Commodore conversion, identified by its own part number for the application.
What is this swap extractor?
It's a left/right header pair for an engine swap — the PH5700_L_R extractors that take the place of the cast manifolds once the 5L EFI motor sits in a Commodore. Pacemaker publishes no diameter, material or year on this listing, so we hold to what's known: the engine and the swap it's listed for, and confirm the rest on the car.
Why does an engine swap need its own header?
In a swap the engine and chassis weren't a factory pairing, so the runners have to be shaped to clear the Commodore's steering and crossmember with the 5L EFI in place. A dedicated swap part number exists for exactly that reason; we use the listing as the starting point and verify the clearances physically.
Will it suit my swap?
It's listed for the Holden Commodore 5L EFI engine swap; with no series, year or driveline published, we treat the listing as the starting point and confirm against your specific build before ordering. A swap can sit the engine in any number of body and steering combinations, so the physical check on the car is what settles fitment rather than a feed match.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men handles swap header fitment across the Illawarra. We check the runners clear the chassis, steering and crossmember with the 5L EFI in place, fit the left/right pair, and seal each flange with fresh gaskets for the heat. RRP is listed at 1327.48 AUD; the fitting cost is quoted once the vehicle is with us and we've seen the engine bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What application is the PH5700_L_R listed for?
- The Holden Commodore 5-litre EFI engine swap, supplied as a left/right header pair. Other specs aren't published, so we confirm fit on the car.
- Is a diameter published for these?
- No — Pacemaker lists no diameter or material. We won't put figures to it; we confirm the fit physically against your swap.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.