Which Discovery does the PH7605 fit?

It's listed for the Land Rover Discovery Series 1 and Series 2 with the 3.5L, 3.9L, 4.0L or 4.6L Rover V8. Confirm your exact engine and series with the workshop.

Is it a left and right pair?

Yes — PH7605L_R is an L/R extractor pair covering both banks of the Rover V8.

PH7605L_R_-_Discovery_1_&_2

PH 7605 3.5L, 3.9 L, 4.0L and 4.6L Rover V8 Land Rover Discovery Series 1 and Series 2

PH 7605 3.5L, 3.9 L, 4.0L and 4.6L Rover V8 Land Rover Discovery Series 1 and Series 2.

BrandPacemaker

Category: Extractors and headers

RRP $1121.43 AUD

Confirmed on order

Request fitted quote Call the workshop

Afterpay, Zip Pay & Zip Money available

PH 7605 3.5L, 3.9 L, 4.0L and 4.6L Rover V8 Land Rover Discovery Series 1 and Series 2 product image

Part specs

SKU: PH7605L_R_-_Discovery_1_&_2
Supplier: Pacemaker
Category: Extractors and headers
Vehicle fitment: Land Rover Discovery 1 Discovery 2
Stock status: Confirmed on order

The Pacemaker PH7605 (MPN PH7605L_R_-_DISCOVERY_1_&_2) is an extractor set for the 3.5L, 3.9L, 4.0L and 4.6L Rover V8, listed to suit the Land Rover Discovery Series 1 and Series 2. It's a left-and-right header pair for the Rover V8 Discovery.

What is this extractor set?

These are extractors for the Rover V8 in 3.5L, 3.9L, 4.0L and 4.6L forms, supplied as a left-and-right pair and listed to suit the Land Rover Discovery Series 1 and Series 2. That broad engine range and the Series 1-2 Discovery body are the defining details. As an L/R pair, both banks get tubular primaries in place of the cast manifolds. No diameter, flow or power figures are published by the supplier.

What are headers and what do they change?

Headers (extractors) replace the cast factory manifolds with tubular primaries that give each cylinder a tuned path out. On the Rover V8 Discovery they're usually fitted as part of a tidy-up or mild build, with clearance around the chassis and steering being the practical concern. They're the front of the exhaust, so the system behind is matched to them. What a set delivers depends on the rest of the exhaust — no numbers are published.

Will it suit my Discovery?

It's listed to suit the Land Rover Discovery Series 1 and Series 2 with the 3.5L, 3.9L, 4.0L or 4.6L Rover V8. Note Pacemaker lists the same PH7605 pair for the Range Rover Classic and County 110 as well, so confirm your exact vehicle and engine with the workshop before ordering.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits Rover V8 extractors like these in the Illawarra. We check primary clearance against the chassis and steering, fit fresh gaskets, and plan the system from the collectors back. RRP is listed at 1121 AUD; fitting is quoted once we've seen the vehicle.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which Discovery does the PH7605 fit?: It's listed for the Land Rover Discovery Series 1 and Series 2 with the 3.5L, 3.9L, 4.0L or 4.6L Rover V8. Confirm your exact engine and series with the workshop.
Is it a left and right pair?: Yes — PH7605L_R is an L/R extractor pair covering both banks of the Rover V8.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section

Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.

Unit 2/8 Shaban St, Albion Park Rail NSW 2527 02 4256 3740 sales@mufflermen.com.au Send vehicle details

PH 7605 3.5L, 3.9 L, 4.0L and 4.6L Rover V8 Land Rover Discovery Series 1 and Series 2

Part specs

What is this extractor set?

What are headers and what do they change?

Will it suit my Discovery?

What does fitting involve at our Illawarra workshop?

Common questions

Fitment support across the Illawarra

Related parts in this category

PH 7605 3.5 and 3.9 Litre Rover V8 Range Rover Classic

PH 7605 3.5 and 3.9 Litre Rover V8 County 110

Range Rover V8 4.6L May 93 - July 02 Extractor Kit

Land Rover Discovery Series 1 1993 - 1998 3.5 & 3.9L V8 Extractor

Range Rover/Land Rover Discovery V8 3.9L 1970 - 1993 Extractor

Land Rover Discovery, Range Rover, 110 County 93 3.5L V8 Extractor

Book the right exhaust job without guessing.