Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5050-03
Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers
Pacemaker Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers.
BrandPacemaker
Category: Extractors and headers
RRP $4105.45 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5050-03
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT
- Stock status
- Confirmed on order
The Pacemaker PP5050-03 is a tri-Y headers package listed to fit the Holden VT Series 1 with the 5.0L eight-cylinder. It replaces the cast factory manifolds on the V8 Commodore-era platform.
What are these tri-Y headers and what do they change?
Headers, or extractors, bolt to the cylinder heads in place of the cast factory manifolds. A tri-Y design pairs the primary pipes in stages before they merge, a layout chosen on V8s to tune scavenging across the rev range. This set is cut for the VT Series 1 5.0L eight-cylinder, so the flanges and routing suit that engine in that body. We publish no flow, power or sound figures for the set and won't invent any.
Will it suit my Holden VT?
It's listed to fit the Holden VT Series 1 with the 5.0L V8. The Series 1 call-out matters because later VT and VX cars differ, and there are related PP5050 variants for different system configurations. Confirm your exact car against the listing with the workshop before ordering.
Is it road legal?
These are headers rather than a catalytic converter or muffler, so they carry no emissions approval of their own. Whether the finished exhaust suits NSW road requirements depends on the rest of the system and how it's engineered. No compliance approval is published by the supplier, and we won't claim one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Holden V8 headers like the PP5050-03 in the Illawarra. We check steering and chassis clearance, fit fresh gaskets and seal the joints before tying into the system behind. We match the listing to your VT Series 1 first. RRP is listed at 4105.45 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5050-03 include a rear system?
- This listing is the tri-Y headers for the VT Series 1 5.0L. A separate PP5050 variant covers the version with rear pipe only; confirm which you need with the workshop.
- Will it fit a Series 2 VT?
- It's listed for the VT Series 1. Confirm your exact car with the workshop before ordering, since feed data can be imperfect.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.