Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5050-04
Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers With Rear Pipe Only
Pacemaker Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3782.17 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5050-04
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT
- Stock status
- Confirmed on order
The Pacemaker PP5050-04 is a tri-Y headers package with rear pipe only, listed to fit the Holden VT Series 1 with the 5.0L eight-cylinder. It's the version that supplies the headers and rear pipe without a muffler.
What does the 'rear pipe only' configuration mean?
Headers, or extractors, replace the cast factory manifolds with tubular pipes off the heads. This PP5050-04 listing is the rear-pipe-only configuration: it provides the headers and the rear pipework but not a muffler in the package, leaving the silencing to be specified separately. That's the difference from the standard PP5050-03, which is the full-system version of the same tri-Y headers.
What are tri-Y headers here?
A tri-Y design pairs the primary pipes in stages before they merge, a layout used on V8s to tune scavenging across the rev range. This set is cut for the VT Series 1 5.0L eight-cylinder. We publish no flow, power or sound figures, and because this is the rear-pipe-only version, the final note depends on the muffler you choose to run with it.
Will it suit my Holden VT?
It's listed to fit the Holden VT Series 1 with the 5.0L V8. The PP5050 range splits by configuration, so confirm both your exact car and that the rear-pipe-only setup is what you want against the listing with the workshop before ordering.
Is it road legal?
These are headers and rear pipework rather than a catalytic converter or muffler, so they carry no emissions approval of their own — and with no muffler in the package, the finished system's road suitability in NSW depends on what's added behind. Oak Flats Muffler Men, in the Illawarra, will work through that with you. No compliance approval is published by the supplier, and we won't claim one.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5050-04 come with a muffler?
- No — it's the rear-pipe-only configuration, so no muffler is included. Oak Flats Muffler Men can spec silencing to suit your VT.
- How does it differ from the PP5050-03?
- The PP5050-03 is the full-system version; the PP5050-04 supplies the headers and rear pipe only.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.