Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5050-53
Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers 3"Inch System
Pacemaker Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers 3"Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4247.99 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5050-53
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT
- Stock status
- Confirmed on order
The Pacemaker PP5050-53 is a tri-Y headers package with a 3in system, listed to fit the Holden VT Series 1 with the 5.0L eight-cylinder. It's the larger-bore version of the tri-Y headers run for the V8 VT.
What does this 3in package cover?
Headers, or extractors, replace the cast factory manifolds with tubular pipes off the heads. This PP5050-53 listing pairs the tri-Y headers with a 3in system, so the run behind the extractors is sized at 3in. The step up from the standard PP5050-03 is the bore — same VT Series 1 5.0L tri-Y headers, larger 3in pipework.
What are tri-Y headers and why the 3in size?
A tri-Y design pairs the primary pipes in stages before merging, a layout used on V8s to tune scavenging across the rev range. Here they're supplied with a matched 3in system so the headers and pipework are sized as one job. The 3in is the larger of the VT Series 1 options; which bore suits depends on the build. We publish no flow, power or sound figures and won't estimate them.
Will it suit my Holden VT?
It's listed to fit the Holden VT Series 1 with the 5.0L V8. The PP5050 range splits by configuration and bore, so confirm both your exact car and that you want the 3in system against the listing with the workshop before ordering.
Is it road legal?
This is headers plus a 3in system rather than a standalone catalytic converter, so NSW road compliance depends on how the complete system is built and what emissions hardware it keeps. Oak Flats Muffler Men, in the Illawarra, will go through the requirements with you. No compliance approval is published by the supplier, and we won't claim one.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- How does the PP5050-53 differ from the PP5050-03?
- Both are tri-Y headers for the VT Series 1 5.0L; the PP5050-53 runs a 3in system where the PP5050-03 is the standard-bore version.
- Will it fit a Series 2 VT?
- It's listed for the VT Series 1. Confirm your exact car with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.