Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5050-54
Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers With Rear Pipe Only 3"Inch System
Holden VT Series 1 5.0L 8 Cylinder Try-Y Headers With Rear Pipe Only 3"Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $3924.95 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5050-54
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT
- Stock status
- Confirmed on order
The Pacemaker PP5050-54 is a tri-Y headers package with rear pipe only in a 3in system, listed to fit the Holden VT Series 1 with the 5.0L eight-cylinder. It's the 3in, rear-pipe-only version of the V8 VT tri-Y headers.
What does this configuration cover?
Headers, or extractors, replace the cast factory manifolds with tubular pipes off the heads. This PP5050-54 listing combines two things: a 3in bore and the rear-pipe-only setup, meaning it supplies the tri-Y headers and 3in rear pipework but not a muffler in the package. It's the larger-bore counterpart to the PP5050-04 and the rear-pipe-only counterpart to the PP5050-53.
What are tri-Y headers here?
A tri-Y design pairs the primary pipes in stages before merging, used on V8s to tune scavenging across the rev range. This set is cut for the VT Series 1 5.0L and runs a 3in rear pipe. Because there's no muffler in the package, the finished note depends on the silencing chosen to suit it. We publish no flow, power or sound figures and won't estimate any.
Will it suit my Holden VT?
It's listed to fit the Holden VT Series 1 with the 5.0L V8. The PP5050 range splits by bore and configuration, so confirm your exact car, the 3in size and the rear-pipe-only setup against the listing with the workshop before ordering.
Is it road legal?
These are headers and 3in rear pipework rather than a catalytic converter or muffler, so they carry no emissions approval of their own — and with no muffler in the package, the finished system's road suitability in NSW depends on what's added behind. Oak Flats Muffler Men, in the Illawarra, will work through that with you. No compliance approval is published by the supplier, and we won't claim one.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5050-54 include a muffler?
- No — it's the rear-pipe-only configuration in 3in, so no muffler is included. Oak Flats Muffler Men can spec silencing to suit your VT.
- How is it different from the PP5050-53?
- The PP5050-53 is the full 3in system; the PP5050-54 supplies the headers and 3in rear pipe only.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.