Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5061-03
Holden VU and VY 6 Cylinder Supercharged Competition Header Ute
Holden VU and VY 6 Cylinder Supercharged Competition Header Ute. Fast.
BrandPacemaker
Category: Extractors and headers
RRP $3864.53 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5061-03
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5061-03 is a competition header listed to fit the Holden VU and VY supercharged six-cylinder ute. It replaces the cast factory manifold on the blown six in the ute body.
What is this competition header and what does it change?
A header, or extractor, replaces the cast factory exhaust manifold with tubular pipes off the cylinder head. This one is listed for the supercharged six-cylinder VU and VY ute and marked as a competition part, which positions it for performance use rather than as a factory-equivalent replacement. On a blown six the header is the front of the exhaust, ahead of whatever runs behind it. We publish no flow, power, boost or sound figures and won't invent any.
Will it suit my Holden VU or VY ute?
It's listed to fit the VU and VY supercharged six-cylinder in the ute body. The supercharged engine and ute body are the key fitment points, and there are related PP5061 variants for the wagon and for rear-pipe-only setups. Confirm your exact car against the listing with the workshop before ordering.
Is it road legal?
This is a competition-marked header, not a catalytic converter or muffler. Competition components aren't presented for blanket road use, and NSW compliance depends on the complete system and how it's engineered and certified — which we'll work through with you. No compliance approval is published by the supplier, and we won't claim one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Holden headers like the PP5061-03 in the Illawarra. On a supercharged ute we check clearance around the blower plumbing, steering and chassis, fit fresh gaskets and seal the joints before building the system behind. We match the listing to your VU/VY first. RRP is listed at 3864.53 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5061-03 a road part?
- It's a competition-marked header, so road use isn't a given. Oak Flats Muffler Men will go through the NSW requirements with you before fitting.
- Does it suit the wagon?
- This listing is the ute version. A separate PP5061 part covers the wagon; confirm your body with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.