Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5061-06
Holden VT VX VY 6 Cylinder Supercharged Competition Header Wagon With Rear Pipe Only
Holden VT VX VY 6 Cylinder Supercharged Competition Header Wagon With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3541.25 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5061-06
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5061-06 is a competition header with rear pipe only listed to fit the supercharged six-cylinder Holden VT–VY wagon. It's the rear-pipe-only competition header for the blown six in the wagon body.
What does this package cover?
This is the competition header with rear pipe only for the VT, VX and VY Holden wagon running the supercharged six-cylinder engine. The header, or extractor, replaces the cast factory manifold at the cylinder head, and this variant pairs it with the rear pipe rather than a full muffler section. The wagon body and the rear-pipe-only configuration set it apart within the PP5061 range.
What is a competition header and what does rear-pipe-only mean?
Headers, or extractors, take the place of the cast factory manifold off the cylinder head — the front of the exhaust. Rear-pipe-only means this listing covers the header and the rear pipe without a muffler section, so the silencing is handled separately. We publish no flow, power or sound figures and won't estimate them; the competition label also flags that road compliance needs care on a supercharged engine.
Will it suit my Holden wagon?
It's listed to fit the VT, VX and VY wagon with the supercharged six. The PP5061 range splits by body and configuration — this is the wagon, rear-pipe-only variant. Confirm your exact car and that it runs the supercharged six against the listing with the workshop before ordering.
Is it road legal?
This is a competition-marked header and rear pipe, not a standalone emissions part such as a catalytic converter or muffler. Competition components aren't presented for blanket road use, and NSW compliance depends on how the finished system is built and certified. No compliance approval is published by the supplier, and we won't claim one. Oak Flats Muffler Men, in the Illawarra, will work through it with you. RRP is listed at 3541.25 AUD.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5061-06 include a muffler?
- No — this is the rear-pipe-only variant, so it covers the header and rear pipe without a muffler section. The muffler is handled separately; the workshop can advise.
- How is it different from the PP5061-05?
- Both are wagon competition headers for the supercharged six. The PP5061-06 is rear-pipe-only; the PP5061-05 is the fuller listed package. Confirm the contents with the workshop.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.