Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-15
Holden 2005 - 06 CV8Z Monaro Duel Outlet 1 3/4" Tuned Headers 2 1/2 Inch System
Holden 2005 - 06 CV8Z Monaro Duel Outlet 1 3/4" Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4523.25 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-15
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-15 pairs 1 3/4in tuned-length headers with a 2 1/2in system for the Holden CV8Z Monaro (2005), in a dual-outlet layout. It's an extractor-and-pipework package rather than a rear-only change.
What does this headers package cover?
The PP5361-15 combines 1 3/4in tuned-length extractors with a 2 1/2in system for the 2005 CV8Z Monaro and finishes through a dual outlet. The primaries are 1 3/4in and the pipework behind them runs at 2 1/2in, exiting through two tailpipes. It's the full extractors-and-system package for the coupe, not a tailpipe swap. We publish no power, flow or sound figures and won't quote any.
What are tuned-length headers and what do they change?
Tuned-length headers replace the cast factory manifolds with separate primary tubes cut to a deliberate length before they merge into a collector. The length is chosen to order the exhaust pulses leaving each cylinder rather than just venting them through one casting. On the CV8Z Monaro V8 the aim is a cleaner path off the heads, carried through the 2 1/2in system, with a fuller note as a by-product.
Will it suit my Holden CV8Z Monaro?
It's listed to fit the Holden CV8Z Monaro from 2005 in dual-outlet form. The coupe body, the V8 driveline and the dual-outlet rear layout dictate the fit, so confirm your exact build with the workshop before ordering. We check the listing against your car first.
Is it road legal?
This package puts tuned headers ahead of the catalytic converter, so fitting it can affect emissions compliance, and the dual-outlet finish bears on the noise side. No road-compliance approval is published by Pacemaker and we won't claim one. Oak Flats Muffler Men in the Illawarra will work through what a registered CV8Z Monaro needs in NSW before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Monaro is the PP5361-15 for?
- It's listed for the Holden CV8Z Monaro from 2005, in the dual-outlet layout. Confirm your exact build with the workshop before ordering.
- Is this just a rear muffler, or the whole thing?
- It's the full package — 1 3/4in tuned headers and a 2 1/2in system, not a rear-section-only change.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.