Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-26
Holden VU and VY Series 1 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System
Holden VU and VY Series 1 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only (SKU: PP5361-26), $3916.75 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $3916.75 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-26
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5361-26 runs 1¾ in tuned-length headers into a 2½ in system supplied as rear-pipe-only, listed to fit the Holden VU and VY Series 1 V8 ute. The 1¾ in primary is the street-biased size; the rear-pipe-only system completes the back of the run.
What does 'rear-pipe-only' mean here?
This package supplies the 1¾ in tuned-length headers plus a 2½ in system that finishes as rear pipe only — the back section of pipework rather than a muffler-included run. Pacemaker lists this as the without-muffler configuration, so we don't claim a muffler that isn't part of it. The rear pipe carries the gas through to the tail on the VU/VY ute.
What does the 1¾ in tuned-length front half suit?
At 1¾ in the primaries keep exhaust-gas velocity up, which on a street V8 favours low-down and mid-range response. 'Tuned-length' means they're matched in length to time the exhaust pulses. They replace the restrictive cast manifolds with mandrel-bent tube and feed the 2½ in run.
Will it suit my VU/VY ute?
It's listed to fit the Holden VU and VY Series 1 8-cylinder ute. We treat that as listed-to-fit and confirm against your exact ute before ordering — the VU/VY Series 1 window is the thing to verify, since feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these tuned-length Pacemaker packages across the Illawarra. We match the listing to your ute, remove the cast manifolds, fit the 1¾ in tuned primaries, and run the 2½ in rear-pipe-only system on fresh gaskets. RRP is listed at 3916.75 AUD; fitting is quoted on the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5361-26 include a muffler?
- No — it's supplied as a rear-pipe-only system (the without-muffler configuration). The package is the 1¾ in headers plus the 2½ in rear pipework.
- What primary size are the headers?
- 1¾ in tuned-length primaries — the street-biased size that keeps low-down and mid-range response on a V8 ute.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.