Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-28
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-28
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Listed to the VZ 6.0L ute, the Pacemaker PP5361-28 pairs 1¾ in tuned-length headers with a 2½ in system supplied as rear-pipe-only. The VZ 6.0L application and the without-muffler rear pipe set this package apart.
Why the VZ 6.0L-specific listing?
This part is tied to the Holden VZ ute with the 6.0L V8, which has its own manifold geometry and underbody on the VZ platform. Pacemaker carries a dedicated part number for that combination rather than the earlier VU/VY ute, so we confirm your VZ build before ordering.
What does 'rear-pipe-only' cover?
The 2½ in system here is supplied as rear pipe only — the back section of pipework, listed as the without-muffler configuration. We don't claim a muffler that isn't part of it. With the 1¾ in tuned-length headers up front, the package is the front extractors plus the rear pipe to finish the run on the VZ ute.
What does the 1¾ in tuned-length primary suit?
At 1¾ in the primaries keep gas velocity up for low-down and mid-range response on a street 6.0L V8. Tuned-length means they're matched in length to time the exhaust pulses, replacing the cast manifolds with mandrel-bent tube into the 2½ in run.
Will it suit my VZ ute, and what does fitting involve?
It's listed to fit the Holden VZ 6.0L 8-cylinder ute; we confirm that against your exact ute before ordering. Oak Flats Muffler Men fits these Pacemaker packages across the Illawarra — we drop the cast manifolds, fit the 1¾ in tuned primaries, and run the 2½ in rear-pipe-only system on fresh gaskets. RRP is listed at 4115.01 AUD; fitting is quoted on the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-28 for the VZ 6.0L specifically?
- Yes — it's listed for the Holden VZ ute with the 6.0L V8. Confirm your exact build with the workshop before ordering.
- Does it come with a muffler?
- No — the 2½ in system is supplied as rear pipe only (the without-muffler configuration), paired with the 1¾ in tuned headers.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.