Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-30
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System
Pacemaker Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4438.29 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-30
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Built around the 6.0-litre VZ V8 ute, Pacemaker PP5361-30 pairs 1¾in tuned-length headers with a full 2½in system. The 6.0-litre fitment is what sets it apart in the range — the headers and pipe routing are cut to that engine in the VZ ute body.
What makes this the 6.0-litre fitment?
The 6.0-litre (L76/Gen-IV-era) VZ ute sits in the engine bay differently to the earlier 5.7, and the header flanges, runner routing and collector are matched to it. PP5361-30 is the complete engine-back system for that motor — 1¾in primaries into a 2½in system — so you're replacing both the cast manifolds and the pipework in one fitment.
Why 1¾in primaries with a 2½in system?
The 1¾in tuned-length primary is the street-V8 bore: it keeps each cylinder's pulse moving fast enough to scavenge well without dropping low-rpm torque, which is what a working 6.0 ute leans on. Feeding into a 2½in system keeps that velocity through the mid-range rather than oversizing the pipe for a high-rpm-only build.
Will it fit my VZ ute?
It's listed to fit the Holden VZ 6.0-litre V8 ute. We treat that as listed-to-fit rather than a promise: send the engine, transmission and any prior exhaust work and we confirm the match on your ute before ordering, since the supplier publishes no individual build year for the listing.
Road legality and fitting at our workshop
This is header-and-pipe hardware, not a catalytic converter or muffler with published certification, so road compliance depends on how the full system is built and whether it's signed off to NSW requirements — that's a per-build conversation. Oak Flats Muffler Men fits these Pacemaker systems in-house across the Illawarra. Listed RRP is 4,438.29 AUD, with fitting quoted once we have the ute in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-30 for the 5.7 or the 6.0 ute?
- The 6.0-litre VZ V8 ute. The headers and routing are matched to that engine; we confirm your exact build before ordering.
- What's the system size?
- A full 2½in system off 1¾in tuned-length headers — the complete engine-back fitment for the VZ 6.0 ute.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.