Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-37
Holden VT VX VY Series 1 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System
Holden VT VX VY Series 1 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4240.03 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-37
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
Pacemaker PP5361-37 is the wagon-bodied system — 1¾in tuned-length headers and a full 2½in run listed to fit the Holden VT, VX and VY Series 1 V8 wagon. The wagon routing is the deciding factor: the rear pipework is shaped for the longer wagon floor and rear-axle layout, not a sedan or ute.
What's wagon-specific about this system?
A wagon runs a different floorpan and rear-end layout to the sedan and ute, so the back section of the exhaust has to route around it. PP5361-37 is the 2½in system mapped to the VT/VX/VY Series 1 wagon body, off 1¾in tuned-length headers up front. It's the full engine-back package for that shape, not a sedan system bent to fit.
What are tuned-length headers?
They replace the restrictive cast factory manifolds with equal, mandrel-bent primary runners merging in a measured collector. The 1¾in primary is the everyday-V8 bore — it scavenges cleanly without bleeding off low-down torque. On the wagon the runners clear that body's bay and chassis.
Will it fit my VT, VX or VY wagon?
It's listed to fit the Holden VT, VX and VY Series 1 V8 wagon. The supplier doesn't break it to a single build year, so we treat fitment as listed-to-fit and confirm it on your wagon — engine and what's already under it — before ordering.
Road legality and fitting at our Illawarra workshop
This is header-and-pipe hardware, not a certified catalytic converter or muffler, so road compliance depends on the complete system and its NSW sign-off, handled per build. Oak Flats Muffler Men fits Pacemaker systems like this across the Illawarra. Listed RRP is 4,240.03 AUD, with fitting quoted once the wagon is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-37 a wagon system?
- Yes — it's listed for the Holden VT/VX/VY Series 1 V8 wagon, with the rear pipework routed for that body. We confirm fitment on your wagon before ordering.
- What's the pipe size?
- A full 2½in system off 1¾in tuned-length headers — the complete engine-back fitment for the wagon.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.