Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-39
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System
Pacemaker Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4015.88 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-39
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-39 is a set of 1-3/4-inch tuned tube extractors/headers paired with a 2-1/2-inch system supplied as rear pipe only, listed to fit the Holden VY Series II / VZ V8 wagon. Extractors replace the cast factory manifolds, and this part ships with the rear pipe only.
What are tuned extractors and what do they change?
Extractors — also called headers — replace the cast iron exhaust manifolds with tubular steel runners. "Tuned" — and the 1-3/4-inch primary size in this listing — describes the runner layout the Pacemaker set uses to scavenge exhaust gas from each cylinder, which is where an extractor-and-system upgrade differs from a tailpipe swap. On a V8 like this Holden, they sit at the very front of the exhaust, ahead of the rest of the system. We publish no flow, power or sound figures and won't quote any.
What does this listing cover?
This listing is the 1-3/4-inch extractor and 2-1/2-inch system combination, supplied as the rear pipe only — the back section of the run rather than a full kit. It's the VY Series II / VZ wagon fitment. Pipe material and finish aren't published by Pacemaker in this record, so we confirm those with you before ordering.
Will it suit my Holden?
It's listed to fit the Holden VY Series II / VZ V8 wagon; confirm the exact build with the workshop before ordering. Extractor fitment is sensitive to engine, body style and accessory layout, so we check your VY Series II / VZ variant, the wagon body against the listing first. Feed data can be imperfect, which is why we verify rather than assume.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractors and matching systems in-house across the Illawarra. We pull the old manifolds, fit the Pacemaker runners with fresh gaskets, line up the rear section against your existing pipework and check clearances on the hoist. Emissions and engineering requirements for modified exhausts vary by build and by NSW rules, so we work those through with you rather than make a blanket claim. RRP is listed at 4015.88 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5361-39 fit my Holden?
- It's listed to fit the Holden VY Series II / VZ V8 wagon. Confirm your exact variant with the workshop before ordering — extractor fitment varies with body and engine.
- Is this a complete kit or just the rear pipe?
- This listing is the rear pipe only — the back section of the system. We confirm how it joins your existing pipework before fitting.
- Can you supply and fit it locally?
- Yes — the workshop supplies the Pacemaker PP5361-39 and fits it in-house. RRP is listed at 4015.88 AUD; fitting is quoted once we've seen the vehicle.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.