Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-40
Holden VZ 6.0L 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe
Holden VZ 6.0L 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System With Rear Pipe Only (SKU: PP5361-40), $4115.01 from Pacemaker. Engineered
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-40
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-40 is a set of tuned tubular headers (extractors) with an accompanying exhaust system, listed to fit the Holden VZ 6.0L wagon. It is the headers-and-system end of an upgrade rather than a tailpipe-only swap, and is configured without a muffler in this listing.
What are tuned extractors and what do they change?
Extractors, also called tubular headers, replace the cast factory exhaust manifold with separate primary tubes that merge into a collector. The aim is to let each cylinder clear its exhaust pulse with less back-pressure and less interference from its neighbours, which is where a tuned header earns its name. On the Holden VZ 6.0L wagon that is the first part of the exhaust the gas reaches, so it sets the tone for everything downstream. This PP5361-40 listing is supplied without a muffler, so the silencing is chosen to suit.
What does the PP5361-40 cover on the Holden?
This is a Holden fitment for the VZ 6.0L wagon, listed to fit that vehicle rather than promised for every build, since chassis variations, prior modifications and accessories can all affect clearance. This part number is the rear-pipe-only version, covering the back section of the run; confirm what is already on the car so the join lands right. Send your exact Holden details and we will confirm the variant before ordering.
Is it road legal?
Extractors and exhaust changes are a registration-sensitive area in NSW, and the rules turn on emissions equipment and noise rather than the headers alone. The supplier does not publish a compliance statement in this record, so we do not claim one. We talk through your vehicle's age, emissions setup and how it is used before fitting, so you know where you stand.
What does fitting involve at the Illawarra workshop?
Oak Flats Muffler Men fits extractor and header systems like this in-house at our Illawarra workshop. Headers are a hands-on job: flange faces, gaskets, steering and crossmember clearance and the downstream joins all get checked on the hoist. The PP5361-40 is listed at $4,115.01 AUD; send your build and we will confirm clearances and the rear section to suit before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5361-40 fit my Holden wagon?
- It is listed to fit the Holden VZ 6.0L wagon. Listings cannot account for every prior modification, so confirm your exact variant with the workshop before ordering.
- Does this include the rear pipe section?
- This part number is the rear-pipe-only version of the listing, so it covers the back section. Tell us what is already on the car so the join lines up.
- What is the price on the PP5361-40?
- It is listed at $4,115.01 AUD. Pricing and availability are confirmed with the workshop, as some lines are brought in to order.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.