Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-41
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4339.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-41
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
For the Holden VY Series 2 / VZ 5.7-litre V8 wagon, Pacemaker PP5361-41 brings 1¾in tuned-length headers and a full 2½in system. The later-generation 5.7 wagon fitment is the distinguishing detail — rear pipework routed for the wagon body and matched to that engine.
What's matched to the VY S2 / VZ 5.7 wagon?
PP5361-41 is the complete 2½in engine-back system for the VY Series 2 and VZ 5.7-litre wagon. The 1¾in tuned-length headers suit that motor, and the rear section is shaped for the wagon's floor and rear-axle layout rather than a sedan or ute. It's a full engine-back change, not a tailpipe swap.
Why a 2½in system here
A 2½in system keeps exhaust velocity up through the mid-range, which is where a road-driven 5.7 wagon lives — loaded, with passengers, around town and on the highway. Behind the 1¾in tuned-length primaries it favours response and a fuller note over oversizing the pipe for a high-rpm build the wagon won't use.
Will it fit my 5.7 wagon?
It's listed to fit the Holden VY Series 2 / VZ 5.7 V8 wagon. The supplier publishes no single build year, so we treat fitment as listed-to-fit and confirm it on your wagon — engine and existing exhaust — before ordering anything.
Road legality and fitting at our workshop
These are headers and pipework, not a certified catalytic converter or muffler, so road compliance depends on the full system and NSW sign-off, handled per build. Oak Flats Muffler Men fits Pacemaker systems like this across the Illawarra. Listed RRP is 4,339.16 AUD, with fitting quoted once the wagon is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which wagon does the PP5361-41 fit?
- The Holden VY Series 2 / VZ 5.7-litre V8 wagon, as a full 2½in system off 1¾in tuned-length headers.
- Is the rear routing wagon-specific?
- Yes — the rear section is shaped for the wagon body. We confirm the fitment on your wagon before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.