Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-42
Holden VZ 6.0L 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System
Pacemaker Holden VZ 6.0L 8 Cylinder Wagon 1 3/4" Tuned Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4438.29 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-42
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Pacemaker PP5361-42 is the 6.0-litre wagon system — 1¾in tuned-length headers into a full 2½in run, listed to fit the Holden VZ 6.0-litre V8 wagon. The combination of the 6.0 engine and the wagon body is what sets this part number apart.
6.0-litre and wagon-bodied: what that means here
PP5361-42 is matched to the VZ 6.0-litre engine and routed for the wagon floorpan. The 1¾in tuned-length headers feed a full 2½in system, replacing both the cast manifolds and the factory pipework. It's the complete engine-back package for that specific engine-and-body combination.
Why the 1¾in primary bore
The 1¾in tuned-length primary is the street-V8 bore: it keeps each cylinder's pulse moving fast enough to scavenge well while holding the low and mid-range torque a 6.0 wagon uses fully loaded. The 2½in system behind it keeps that velocity through the rev range the wagon actually drives in.
Will it suit my VZ 6.0 wagon?
It's listed to fit the Holden VZ 6.0-litre V8 wagon. With no individual build year published, we treat fitment as listed-to-fit and verify it on your wagon — engine, transmission and existing exhaust — before ordering.
Is it road legal, and what does fitting involve?
Headers and pipework aren't a certified emissions device, so whether the finished wagon meets NSW requirements depends on the complete system and its sign-off — a per-build matter. Oak Flats Muffler Men fits these Pacemaker systems in-house across the Illawarra. Listed RRP is 4,438.29 AUD; fitting is quoted once the wagon is in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-42 for the wagon?
- Yes — the Holden VZ 6.0-litre V8 wagon, as a full 2½in system off 1¾in tuned-length headers.
- Does it fit the 5.7 wagon?
- This listing is the 6.0-litre fitment. For the 5.7 wagon we'll match the correct Pacemaker part number.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.