Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-58
Holden VZ 6.0L 8 Cylinder 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only (SKU: PP5361-58), $4257.79 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4257.79 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-58
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Pacemaker PP5361-58 steps the system up to 3in for the Holden VZ 6.0-litre V8, supplied as the rear-pipe-only configuration off 1¾in tuned-length headers. The 3in pipe size paired with the rear-pipe-only build is what defines this part — bigger-bore flow for a 6.0 that already has its front end sorted.
Why a 3in system on the 6.0?
A 3in system opens the pipe up for a 6.0-litre V8 carrying more breathing modifications or chasing a freer top-end than the 2½in cars. The larger bore trades a little low-rpm velocity for more flow capacity higher up. PP5361-58 runs that 3in size — here in the rear-pipe-only form, so it's the back section rather than a complete engine-back system.
What the rear-pipe-only build covers
This is the 3in rear pipework, listed with 1¾in tuned-length headers. It suits a VZ 6.0 that already has its headers and front pipe in place and needs the back half matched in 3in. We confirm what's currently fitted so the rear section joins the existing front cleanly.
Will it suit my VZ 6.0?
It's listed to fit the Holden VZ 6.0-litre V8. The supplier publishes no individual build year, so we treat fitment as listed-to-fit and verify it on your car — engine and the front pipework the rear has to meet — before ordering.
Road legality and fitting at our workshop
Headers and pipework aren't a certified catalytic converter or muffler, so road compliance depends on the complete system and NSW sign-off, handled per build. Oak Flats Muffler Men fits these Pacemaker systems across the Illawarra. Listed RRP is 4,257.79 AUD; the fitting charge is quoted with the car in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What size system is the PP5361-58?
- A 3in system, supplied as the rear-pipe-only configuration off 1¾in tuned-length headers, for the Holden VZ 6.0 V8.
- Is this the full system?
- No — it's the rear pipework only. We confirm your existing front pipework matches the 3in rear before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.