Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-62
Holden 2001 - 2005 CV8 Monaro Single Outlet 1 3/4" Tuned Headers 3" Inch System
Pacemaker Holden 2001 - 2005 CV8 Monaro Single Outlet 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4094.98 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-62
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden V2
- Stock status
- Confirmed on order
Pacemaker PP5361-62 is the rear-pipe-only build of the 3in system for the 2001–2005 Holden CV8 Monaro, single outlet, run off 1¾in tuned-length headers. It pairs two distinguishing points: the single-outlet rear of that era's Monaro, and a back-section-only supply.
Who is the rear-pipe-only Monaro build for?
This is the 3in rear pipework rather than a full engine-back system, terminating in the single-outlet layout of the 2001–2005 CV8. It suits a Monaro that already has its headers and front pipe handled and needs only the back half matched. We confirm what's currently fitted so the rear section joins cleanly.
The 1¾in tuned-length headers
The listing pairs the rear pipe with 1¾in tuned-length headers — equal mandrel-bent primaries replacing the factory cast manifolds and merging in a measured collector. The 1¾in bore is the street-V8 choice, scavenging well without trading away the low-down torque the coupe uses day to day.
Will it fit my single-outlet CV8?
It's listed to fit the Holden CV8 Monaro, 2001–2005, single outlet. We treat fitment as listed-to-fit: send your car's year, outlet configuration and front pipework and we verify the rear section matches before ordering.
Is it road legal, and what's involved?
Pipework and headers aren't a certified emissions device, so road compliance depends on the complete system and its NSW sign-off — a per-build question. Oak Flats Muffler Men fits these Pacemaker systems across the Illawarra. Listed RRP is 4,094.98 AUD; the fitting charge is quoted with the car in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-62 a full system?
- No — it's the rear-pipe-only 3in configuration for the 2001–2005 single-outlet CV8 Monaro, off 1¾in tuned-length headers.
- Does it suit the dual-outlet Monaro?
- This terminates in the single-outlet layout. For the later dual-outlet car we'll match the correct Pacemaker part.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.