Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-63
Holden 2005 - 06 CV8Z Monaro Duel Outlet 1 3/4" Tuned Headers 3" Inch System
Holden 2005 - 06 CV8Z Monaro Duel Outlet 1 3/4" Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4575.10 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-63
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-63 is the dual-outlet 3in system with 1¾in tuned-length headers, listed for the Holden CV8Z Monaro from 2005. The dual-outlet rear is the distinguishing feature here, a twin-exit layout suited to the Monaro coupe's tail.
What does the dual-outlet layout give the Monaro?
This system is configured for a dual outlet, splitting the rear into two exits rather than a single tailpipe. On the CV8Z Monaro that suits the coupe's rear styling and gives the 3in run a twin-exit finish. It's the headline difference over a single-outlet system on the same platform; the rear routing and exit are built for the Monaro's tail.
What do the 1¾in headers and 3in run cover?
It's a header-back package: 1¾in tuned-length headers replace the cast manifolds at the heads, then feed a full 3in system to the dual outlet. The 1¾in primary is the street-V8 bore that scavenges cleanly across the everyday rev range, and the 3in run gives flow headroom behind it. Manifolds and original pipework come out and are replaced as one PP5361-63 set.
Will it suit my 2005 CV8Z Monaro?
It's listed to fit the Holden CV8Z Monaro from 2005. Send your Monaro details and the workshop confirms the fitment, including the dual-outlet rear routing on your car, before anything is ordered.
Is it road legal, and how is it fitted?
These are headers and pipework, not a certified emissions device, so whether the finished car meets NSW requirements depends on the complete system and its sign-off, handled per build. Oak Flats Muffler Men supplies and fits these Pacemaker systems in-house across the Illawarra. Listed RRP is 4,575.10 AUD; fitting is quoted once the car is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What makes the PP5361-63 different from a single-outlet system?
- It's configured for a dual outlet, a twin-exit rear suited to the CV8Z Monaro coupe, on a full 3in run off 1¾in headers.
- Will it fit my CV8Z Monaro?
- It's listed to fit the Holden CV8Z Monaro from 2005. Confirm your exact build with the workshop before ordering.
- What's the header and system size?
- 1¾in tuned-length headers into a full 3in system, finished with a dual outlet.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.