Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-72
Holden VU and VY Series 1 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System With Rear
Holden VU and VY Series 1 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4059.53 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-72
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
Pacemaker PP5361-72 is the 3in rear-pipe-only configuration for the Holden VU and VY Series 1 V8 ute, run off 1¾in tuned-length headers. It combines the larger 3in bore with a back-section-only supply, shaped for the ute body.
Why rear-pipe-only on this ute?
This listing supplies the 3in rear pipework rather than the whole engine-back run. It suits a VU / VY Series 1 ute that already has its headers and front pipe handled and only needs the back half — routed for the ute's tray and rear axle — matched in 3in. We confirm what's already fitted so the rear section mates cleanly.
The 1¾in tuned-length headers
The listing pairs the rear pipe with 1¾in tuned-length headers: equal mandrel-bent primaries replacing the cast manifolds and merging in a measured collector. The 1¾in bore is the street-V8 choice — strong scavenging without giving up the low-down torque a ute uses loaded or towing.
Will it suit my VU / VY Series 1 ute?
It's listed to fit the Holden VU and VY Series 1 V8 ute. With no specific build year published, we treat fitment as listed-to-fit and verify it on your ute, including how the 3in rear joins the existing front pipework, before ordering.
Is it road legal, and what's involved in fitting?
Pipework and headers aren't a certified emissions device, so whether the finished ute meets NSW requirements depends on the complete system and sign-off — a per-build matter. Oak Flats Muffler Men fits these Pacemaker systems across the Illawarra. Listed RRP is 4,059.53 AUD; the fitting charge is quoted with the ute in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-72 a full system?
- No — it's the rear-pipe-only 3in configuration for the Holden VU / VY Series 1 V8 ute, off 1¾in tuned-length headers.
- What's the bore?
- A 3in rear section — the larger pipe for a ute chasing more top-end flow. We confirm your front pipework matches first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.