Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-74
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4257.79 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-74
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-74 is the rear-pipe-only 3in configuration for the Holden VZ 6.0L V8 ute, off 1¾in tuned-length headers. It supplies the back section rather than a full engine-back kit, the build for a 6.0 ute that already has its front pipework sorted.
What does rear-pipe-only mean here?
This listing is the 3in rear pipework, not a complete muffler-to-tip or engine-back system. It suits a VZ 6.0 ute that already has its headers and front pipe in place and needs the back half matched in 3in, routed for the ute body. Because it's the rear section, we confirm what's already fitted so the new pipe joins cleanly to your existing front-end.
What does the 6.0 ute application need?
The 6.0-litre V8 ute carries its rear exhaust under a tray and over the rear suspension, so the rear routing is ute-specific. The 1¾in tuned-length headers this rear section is listed against are the street-V8 bore that scavenges cleanly, and the 3in rear opens the bore for flow on the 6.0 without changing the front-end you already run.
Will it suit my VZ 6.0 ute?
It's listed to fit the Holden VZ 6.0L V8 ute. With no individual build year published, we treat fitment as listed-to-fit and verify it on your ute, including how the 3in rear joins your existing front pipework, before ordering.
Is it road legal, and how is it fitted?
Headers and pipework aren't a certified emissions device, so road compliance depends on the complete system and NSW sign-off, handled per build. Oak Flats Muffler Men fits these Pacemaker systems across the Illawarra. Listed RRP is 4,257.79 AUD; the fitting charge is quoted with the ute in the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-74 a full system?
- No, it's the rear-pipe-only 3in configuration for the Holden VZ 6.0L V8 ute. It assumes your headers and front pipe are already in place.
- Which engine is it for?
- The VZ 6.0L V8 ute. We confirm your engine and existing front pipework match before ordering.
- Why only the rear pipe?
- It supplies the 3in back section for a ute that already has its front-end sorted. We check it joins your existing pipework cleanly.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.