Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-75
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System
Pacemaker Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4481.69 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-75
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
Built on 1¾in primary tubing, the Pacemaker PP5361-75 is a tuned tube-and-merge header set with a matched 3-inch system listed to fit the Holden VY Series 2 and VZ 5.7-litre V8 ute. The 1¾in primaries keep gas speed up for low-down and mid-range response on a street V8.
What does the 1¾in primary tubing suit?
Primary tube size is an application choice. The 1¾in primaries here keep exhaust-gas velocity high through the bottom and middle of the rev range, which is where a road-driven 5.7 VY/VZ ute spends most of its time. They replace the restrictive cast factory manifolds with tuned-length runners that merge into a collector, then feed the 3-inch system. It's the package sized for daily V8 driveability rather than a high-rpm-only setup.
What's a tuned header set and how does it sit in the system?
Extractors (tuned headers) bolt to the cylinder heads in place of the cast manifolds and carry spent gas to the collector, where it joins the rest of the exhaust. This PP5361-75 set is supplied with its own matched 3-inch pipework as a complete header-plus-system change. We publish no power, flow or sound figures and won't quote any.
Will it suit my VY Series 2 or VZ ute?
It's listed to fit the Holden VY Series 2 and VZ 5.7-litre V8 in ute body. The ute-specific routing and crossmember clearance matter, so send your exact build — engine, transmission and any prior modifications — and we'll confirm it against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker header packages like this in-house across the Illawarra. We check head-flange seal, steering and crossmember clearance on the ute, and align the 3-inch system through to the back. RRP is listed at 4481.69 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why 1¾in primaries on this set?
- The PP5361-75 runs 1¾in primary tubing, which keeps gas speed up for low and mid-range response on a street-driven 5.7 V8 — a sensible size for a daily ute rather than a high-rpm race build.
- Does it come with the rest of the exhaust?
- Yes — this version is the full package: tuned headers plus a matched 3-inch system. Confirm the exact fitment for your VY Series 2 or VZ ute with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.