Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-76
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System
Holden VZ 6.0L 8 Cylinder Ute 1 3/4" Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4580.81 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-76
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-76 pairs 1¾in tuned headers with a 3-inch system for the Holden VZ 6.0-litre V8 ute. This is the 6.0L-specific set — cut for the later Gen IV head and port layout rather than the 5.7, so the fitment is engine-specific.
What makes this the 6.0-litre version?
Where the broader VY/VZ V8 range covers the 5.7, the PP5361-76 is listed specifically to the Holden VZ 6.0-litre ute. The 6.0 uses a different head and port arrangement, so a header set made for it bolts to the right flange pattern. It's 1¾in primary tubing feeding a 3-inch system — sized for street and towing torque on the bigger-capacity V8.
Why 1¾in primaries on a 6.0?
1¾in is a street-biased primary size: it keeps gas velocity up where a 6.0 ute does its work — low and mid-range, hauling and around town — rather than chasing top-end only. The runners merge into a collector and the matched 3-inch pipework carries gas to the back. No flow or power figures are published, and we won't quote any.
Will it suit my VZ 6.0 ute?
It's listed to fit the Holden VZ 6.0-litre V8 in ute body. Engine code, gearbox and any earlier exhaust work all affect the fit, so confirm your exact build with us before ordering and we'll check it against the listing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker header-and-system packages in the Illawarra. We seal the head flanges, check clearance around the steering and crossmember on the ute, and run the 3-inch system through to the tailpipe. RRP is listed at 4580.81 AUD; fitting is quoted after we inspect the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the PP5361-76 different from the 5.7 set?
- Yes — it's listed specifically for the VZ 6.0-litre V8, which has its own head and port layout. Tell us your engine and we'll confirm the right set for your ute.
- Does it include the rear pipework?
- This version is supplied as headers plus a matched 3-inch system. Confirm the full fitment for your VZ 6.0 ute with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.