Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-85
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 3/4" Tuned Headers 3" Inch System
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 3/4" Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4158.66 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-85
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-85 is a set of tuned extractors (headers) listed to fit the Holden VY Series 2 and VZ 5.7 8-cylinder Wagon. It runs 1-3/4in primary tubes into a 3in system supplied as rear pipe only, without a muffler.
What does this extractor set cover?
Extractors swap the factory cast manifolds for longer, tuned primary tubes that collect each cylinder's pulse before merging at the collector. The PP5361-85 runs 1-3/4in primaries into a 3in system, and this listing is the rear-pipe-only build without a muffler, so it covers the headers and pipework rather than a silenced rear section. It's the without-muffler variant for this later Commodore-platform wagon.
What does the without-muffler, rear-pipe-only version mean?
The rear-pipe-only, without-muffler build leaves out the silencer. It flows more freely as a result but is louder than a muffled equivalent, and it suits owners who want to choose their own muffler or run a particular rear setup. Expect a note louder than stock. Because this listing has no factory-style silencer, decide up front whether you'll also want a muffler — we can advise what suits the 3in pipework on this 5.7 wagon.
Will it suit my Holden wagon?
It's listed to fit the Holden VY Series 2 and VZ 5.7 8-cylinder Wagon. These late-model Commodore wagons changed in detail across the run and feed data can be imperfect, so confirm the exact build with the workshop before ordering — series and engine decide which header set is correct.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor sets like the PP5361-85 in-house across the Illawarra. Headers sit close to the engine and steering, so we check clearances, gaskets and sensor bungs before it goes on the hoist. It's listed at $4,158.66 RRP and is typically a special-order item, so send your registration or build details and we'll confirm the part and lead time. On emissions: headers change the manifold section, so road compliance depends on your state's requirements — confirm what's needed for NSW registration with us before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does the PP5361-85 include a muffler?
- No — it's listed as rear pipe only, without a muffler. It will be louder than a muffled setup, so tell us if you want a muffler added.
- Will it fit my Holden VY Series 2 or VZ 5.7 wagon?
- It's listed to fit the Holden VY Series 2 and VZ 5.7 8-cylinder Wagon. Fitment data can be imperfect, so confirm your exact series and engine with the workshop first.
- Are extractors road legal in NSW?
- Extractors replace the manifold section, so road compliance depends on your state's rules. We can talk through what NSW registration needs before you fit them.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.