Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5361-88
Holden VZ 6.0L 8 Cylinder Wagon 1 3/4" Tuned Headers 3" Inch System
Pacemaker Holden VZ 6.0L 8 Cylinder Wagon 1 3/4" Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4580.81 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5361-88
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5361-88 is the wagon-bodied, 6.0-litre version: 1¾in tuned headers and a 3-inch system listed to fit the Holden VZ 6.0-litre V8 wagon. It combines the wagon-specific routing with the later 6.0 head and port layout.
What makes this the 6.0 wagon set?
Two things distinguish the PP5361-88: it's cut for the Holden VZ 6.0-litre V8 — the bigger-capacity engine with its own head and port pattern — and it's routed for the wagon body, with the path behind the collector shaped to the wagon's floor and rear clearance. That combination means it's listed specifically to the VZ 6.0 wagon rather than the ute or 5.7.
Why 1¾in primaries on the 6.0 wagon?
1¾in primary tubing keeps gas velocity high through the low and mid-range — the rev band a 6.0 wagon uses for family hauling and towing. The tuned runners replace the cast factory manifolds and merge into a collector ahead of the 3-inch system. No power, flow or sound figures are published, and we won't quote any.
Will it suit my VZ 6.0 wagon?
It's listed to fit the Holden VZ 6.0-litre V8 wagon. Engine code, transmission and body style all matter for the fit, so confirm your exact build with us and we'll check it against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker wagon packages in the Illawarra. We seal the head flanges, check the wagon's tunnel and rear clearance, and align the 3-inch system to the tailpipe. RRP is listed at 4580.81 AUD; fitting is quoted after we inspect the wagon.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this set both 6.0 and wagon specific?
- Yes — the PP5361-88 is listed to the Holden VZ 6.0-litre wagon, combining the 6.0 head pattern with wagon-specific routing. Confirm your build with the workshop before ordering.
- Does it come with the full system?
- It's supplied as headers plus a matched 3-inch system shaped for the wagon. We confirm the fitment for your VZ 6.0 wagon before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.