Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-04
Holden VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-04
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Stepping up to 1⅞in primary tubing, the Pacemaker PP5363-04 is a tuned-header and 2½-inch system listed for the Holden VZ 6.0-litre V8, supplied rear-pipe-only. The larger 1⅞in primaries suit a higher-output, higher-rpm 6.0 build.
What does 1⅞in primary tubing suit?
Primary tube size is an application choice. The 1⅞in primaries on the PP5363-04 are the larger bore in the range, sized for a higher-rpm, higher-output 6.0 build where bigger runners can flow more at the top end. They replace the cast factory manifolds with tuned-length runners that merge into a collector, then feed the 2½-inch system. It's the option for a worked 6.0 rather than a stock-output daily.
Why is it supplied rear-pipe-only?
This PP5363-04 is configured rear-pipe-only — the rear muffler is left off — so it suits a build running a separate muffler or an existing back-end. The headers and 2½-inch system are supplied; how the run terminates depends on your chosen rear section. No power, flow or sound figures are published and we won't quote any.
Will it suit my VZ 6.0?
It's listed to fit the Holden VZ 6.0-litre V8. Engine code and your intended rear section both matter for the fit, so confirm your full build with us and we'll check the PP5363-04 against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker header packages in the Illawarra and can supply a rear muffler to finish the run. We seal the head flanges, check clearance, and tie the 2½-inch system into your back-end. RRP is listed at 4115.01 AUD; fitting is quoted after inspection.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Why the larger 1⅞in primaries?
- 1⅞in is the bigger primary bore, suited to a higher-rpm, higher-output 6.0 build that can use the extra top-end flow. We can talk through whether it fits your goals for the car.
- What's left off in the rear-pipe-only build?
- The rear muffler — the PP5363-04 is supplied without it, for builders finishing their own back-end. We can supply and fit a muffler to complete it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.