Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-09
Holden 2005 - 06 CV8Z Monaro Duel Outlet 1 7/8 Tuned Headers 2 1/2 Inch System
Holden 2005 - 06 CV8Z Monaro Duel Outlet 1 7/8 Tuned Headers 2 1/2 Inch System (SKU: PP5363-09), $4523.25 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4523.25 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-09
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Listed for the 2005 Holden CV8-Z Monaro, the Pacemaker PP5363-09 is a 1⅞in tuned-header set feeding a dual-outlet 2½-inch system. The dual-outlet rear is what distinguishes this coupe-specific set from the ute systems in the range.
What does the dual-outlet layout mean here?
The PP5363-09 is built for the 2005 Holden CV8-Z Monaro and finishes through a dual-outlet rear, splitting the flow to two exit points to suit the coupe's rear styling and routing. Ahead of that it runs 1⅞in tuned headers into a 2½-inch system. The dual-outlet termination is specific to this Monaro listing rather than a single-exit ute system.
Why 1⅞in primary tubing?
1⅞in is the larger primary bore, sized for a higher-output, higher-rpm V8 build where bigger runners flow more up top. The tuned runners replace the cast factory manifolds and merge into a collector ahead of the 2½-inch dual-outlet system. We publish no power, flow or sound figures and won't quote any.
Will it suit my CV8-Z Monaro?
It's listed to fit the 2005 Holden CV8-Z Monaro. The exact engine and any prior exhaust work change the fit, so confirm your build with us and we'll check the PP5363-09 against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Pacemaker header packages in the Illawarra. We seal the head flanges, check coupe clearance, align the 2½-inch system, and set the dual outlets to sit correctly at the rear. RRP is listed at 4523.25 AUD; fitting is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's special about this Monaro set?
- The PP5363-09 finishes through a dual-outlet rear, specific to the 2005 CV8-Z Monaro coupe, with 1⅞in headers and a 2½-inch system. Confirm your build with the workshop before ordering.
- Is it a complete system?
- It's listed as the headers plus a dual-outlet 2½-inch system for the 2005 CV8-Z Monaro. We confirm the full fitment before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.