Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-20
Holden VU and VY Series 1 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System With Rear
Holden VU and VY Series 1 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $3916.75 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-20
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5363-20 is the rear-pipe-only build of the 1⅞in-primary, 2½-inch system for the Holden VU and VY Series 1 V8 ute. Supplied without the rear muffler, it pairs the larger primaries with an open-ended back for custom completion.
What does the rear-pipe-only build give you?
This PP5363-20 covers the Holden VU and VY Series 1 ute with 1⅞in tuned headers and a 2½-inch system, supplied rear-pipe-only — the rear muffler is left off. That suits a build matching a separate muffler or an existing back-end. It's a deliberate configuration, not a missing part.
Why the larger 1⅞in primaries?
1⅞in primary tubing is the bigger bore, sized for a higher-rpm, higher-output V8 build that can use the extra top-end flow. The tuned runners replace the cast factory manifolds and merge into a collector ahead of the 2½-inch pipework, which carries gas to wherever your rear section picks up. No power or sound figures are published and we won't quote any.
Will it suit my VU or VY Series 1 ute?
It's listed to fit the Holden VU and VY Series 1 V8 ute. Being rear-pipe-only, the termination depends on your chosen rear section, so confirm your full plan with us and we'll check the PP5363-20 against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker header packages in the Illawarra and can supply a rear muffler to complete the run. We seal the head flanges, check ute clearance, and tie the 2½-inch system into your back-end. RRP is listed at 3916.75 AUD; fitting is quoted after inspection.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the difference from the full system?
- The PP5363-20 is rear-pipe-only — supplied without the rear muffler — for builders finishing their own back-end. We can supply a muffler to complete it.
- Why 1⅞in primaries?
- They're the larger bore, suited to a higher-rpm, higher-output VU/VY ute build. Confirm your goals and fitment with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.