Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-22
Holden VZ 6.0L 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only (SKU: PP5363-22), $4115.01 from Pacemaker. Engineered
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-22
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Cut for the Holden VZ 6.0-litre V8 ute, the Pacemaker PP5363-22 is the rear-pipe-only build of the 1⅞in-primary, 2½-inch system. It's the 6.0L ute set supplied without the rear muffler for custom back-end completion.
What sets this 6.0 ute, rear-pipe-only set apart?
The PP5363-22 is listed specifically to the Holden VZ 6.0-litre ute — the larger-capacity V8 with its own head and port layout — and is supplied rear-pipe-only, leaving off the rear muffler. That suits a 6.0 ute owner running a separate muffler or existing rear section rather than a full enclosed system.
Why 1⅞in primaries on the 6.0?
1⅞in is the larger primary bore, sized for a higher-rpm, higher-output 6.0 build that can use the extra top-end flow. The tuned runners replace the cast factory manifolds and merge into a collector ahead of the 2½-inch pipework. No power, flow or sound figures are published and we won't quote any.
Will it suit my VZ 6.0 ute?
It's listed to fit the Holden VZ 6.0-litre V8 ute. Being rear-pipe-only, the termination depends on your chosen rear section, so confirm your engine and full plan with us and we'll check the PP5363-22 against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker header packages in the Illawarra and can supply a rear muffler to finish the system. We seal the head flanges, check ute clearance, and run the 2½-inch system into your back-end. RRP is listed at 4115.01 AUD; fitting is quoted after inspection.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this the 6.0-specific ute set?
- Yes — the PP5363-22 is listed to the Holden VZ 6.0-litre ute, which has its own head and port layout. Tell us your engine and we'll confirm it.
- What does rear-pipe-only include?
- Headers plus the 2½-inch system, but no rear muffler — for builders finishing their own back-end. We can supply a muffler to complete it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.