Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-23
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 7/8 Tuned Headers 2 1/2 Inch System (SKU: PP5363-23), $4339.16 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4339.16 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-23
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5363-23 is the complete 1⅞in-primary, 2½-inch system listed for the Holden VY Series 2 and VZ 5.7-litre V8 ute — supplied with the full back-end. It's the turnkey larger-primary set for the 5.7 Holden ute.
What's included in the complete set?
Unlike the rear-pipe-only configurations in the range, the PP5363-23 is supplied as a full run: 1⅞in tuned headers plus the matched 2½-inch system right through to the back. It's listed to the Holden VY Series 2 and VZ 5.7 ute, replacing the cast factory manifolds with tuned runners that merge into a collector and feed the system rearward.
What do the 1⅞in primaries suit?
1⅞in is the larger primary bore, sized for a higher-rpm, higher-output 5.7 build that can use the extra top-end flow. It's the more aggressive primary choice in the range rather than the everyday-biased smaller bore. We publish no power, flow or sound figures and won't quote any.
Will it suit my VY Series 2 or VZ ute?
It's listed to fit the Holden VY Series 2 and VZ 5.7-litre V8 ute. Engine, transmission and any earlier exhaust work all affect the fit, so send your build and we'll confirm the PP5363-23 against the listing before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits these Pacemaker header-and-system packages in the Illawarra. We seal the head flanges, check steering and crossmember clearance on the ute, and align the full 2½-inch system through to the tailpipe. RRP is listed at 4339.16 AUD; fitting is quoted once we've seen the vehicle.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this the full system?
- Yes — the PP5363-23 is supplied complete: headers plus a matched 2½-inch system through to the back. Confirm the fitment for your VY Series 2/VZ ute before ordering.
- Who are the 1⅞in primaries for?
- They're the larger bore, suited to a higher-rpm, higher-output 5.7 build. We can advise whether they fit your plans for the car.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.