Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-33
Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 7/8 Tuned Headers 2 1/2 Inch System
Pacemaker Holden VY Series 2 - VZ 5.7 8 Cylinder Wagon 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4015.88 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-33
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
Pacemaker PP5363-33 covers the later 5.7 V8 wagon — VY Series 2 and VZ — as a rear-pipe-only package: tuned 1⁻₇⁄₈in headers with a 2in system supplied without the muffler. The 5.7-litre VY2/VZ application is the dividing line that separates this from the earlier-series wagon set.
Which wagon does this fit?
PP5363-33 is listed for the VY Series 2 and VZ 5.7 V8 Holden wagon specifically. The late-model wagon's floorpan and rear mounting differ enough from the Series 1 cars that Pacemaker gives it its own listing, with the 2in run routed for that body. We treat the listing as listed-to-fit and verify your build on the hoist.
What's the rear-pipe-only configuration about?
This SKU is the without-muffler build: it supplies the tuned headers and the 2in pipework to finish the rear section, rather than a complete muffler assembly. It suits an owner pairing it with their own silencing on a VY2 or VZ wagon. The 1⁻₇⁄₈in tuned-length primaries replace the cast factory manifold, giving each cylinder a matched runner before the collector.
Is it road legal?
These are tuned headers, not a catalytic converter or muffler, so the part itself carries no emissions device. On a 5.7 wagon, road compliance comes down to what muffler and downstream gear you run and how the whole system is engineered to NSW requirements — something we sort per car. Pacemaker makes no compliance claim for the set and neither do we.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men fits these VY2/VZ wagon sets in-house. We match PP5363-33 to your 5.7 wagon, fit the headers and 2in pipework, then tie in your muffler and check rear clearances. Listed RRP is 4015.88 AUD, with fitting quoted once the wagon's on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the muffler supplied with PP5363-33?
- No. This is the without-muffler configuration — tuned headers plus the 2in pipework to complete the rear section.
- Which engine and wagon is it listed for?
- The VY Series 2 and VZ 5.7 V8 Holden wagon. Confirm your exact variant with us before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.