Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-34
Holden VZ 6.0L 8 Cylinder Wagon 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe
Holden VZ 6.0L 8 Cylinder Wagon 1 7/8 Tuned Headers 2 1/2 Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4115.01 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-34
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Pacemaker PP5363-34 is the 6.0L VZ wagon set in rear-pipe-only form: tuned 1⁻₇⁄₈in headers with a 2in system supplied without the muffler. The 6.0-litre engine is the distinguishing call here — it's the listing for the larger-capacity Gen IV VZ wagon rather than the 5.7 cars.
Why the 6.0L-specific set?
Pacemaker lists PP5363-34 against the 6.0L V8 in the VZ wagon, and the engine listing is the point of difference within the family. Matching the header set to the 6.0L means the port flanges and runner geometry are cut for that engine. The body is the VZ wagon, so the 2in pipework is routed for the long-roof floorpan rather than a sedan or ute.
What does the without-muffler build supply?
This is the rear-pipe-only configuration: tuned headers plus the 2in pipework to complete the rear section, with the muffler left to the owner. It suits a 6.0L VZ wagon being built with separately chosen silencing. The 1⁻₇⁄₈in tuned-length primaries replace the restrictive factory cast manifold, giving each cylinder a matched-length runner into the collector.
Is it road legal?
Tuned extractors aren't a catalytic converter or muffler, so there's no certified emissions device in the part. With a 6.0L wagon, whether it stays compliant depends on the muffler you fit and how the full system is signed off to NSW requirements, which we walk through per vehicle. Pacemaker publishes no approval for the set and we won't imply one.
How does Oak Flats fit it?
Oak Flats Muffler Men fits 6.0L VZ wagon sets like this across the Illawarra. We match PP5363-34 to your 6.0L wagon, fit the headers and 2in pipework, then tie in your muffler and confirm clearances. Listed RRP is 4115.01 AUD; labour is quoted with the car on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What engine is PP5363-34 cut for?
- The 6.0L V8 in the VZ Holden wagon. We confirm your exact build before ordering.
- Does it come with a muffler?
- No — it's the rear-pipe-only configuration, supplying the headers and 2in pipework to finish the rear section.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.