Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-54
Holden VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4257.79 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-54
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The 1-7/8in primary tubing is what defines the Pacemaker PP5363-54: a large-bore tuned header set feeding a 3in system, listed to fit the Holden VZ 6.0L eight-cylinder. It's the rear-pipe-only build, supplied without the muffler section.
What does 1-7/8in primary tubing suit?
Primary bore is an application choice, and the PP5363-54 sits at the larger end with 1-7/8in runners. Bigger primaries like this favour higher-rpm, higher-output eight-cylinder builds, giving the gas room to move once the engine is working hard, rather than chasing the very low-down response that smaller tubing keeps. On the 6.0L VZ that bore is matched to a 3in system behind it, so the header isn't choked by a tighter pipe downstream.
Why tuned headers over the cast manifold?
Tuned headers, also called extractors, replace the factory cast manifolds with separate tubular runners off each cylinder, with the primary lengths matched so the cylinders scavenge in step. The PP5363-54 changes the exhaust side of the engine; it's part of the wider exhaust rather than an internal component, and it works with whatever sits downstream.
Will it suit my Holden VZ?
It's listed to fit the Holden VZ with the 6.0L eight-cylinder. Because header fitment is sensitive to the precise variant, confirm your exact VZ model and that it's the 6.0L with the workshop before ordering this rear-pipe-only set.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits tuned headers like the PP5363-54 in-house across the Illawarra. The job needs good access to drop the factory manifolds, fresh gaskets, and the 3in rear pipework behind the extractors, with the muffler arrangement discussed since this build comes without one. Supplied by Pacemaker at $4,257.79 AUD; send your VZ details and we'll confirm the fit.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What primary size are these headers?
- 1-7/8in tuned primaries, which suit higher-rpm eight-cylinder builds, feeding a 3in system.
- Does the PP5363-54 include a muffler?
- No, it's the rear-pipe-only build supplied without the muffler section, listed for the Holden VZ 6.0L.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.