Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-57
Holden 2001 - 2005 CV8 Monaro Single Outlet 1 7/8 Tuned Headers 3" Inch System
Holden 2001 - 2005 CV8 Monaro Single Outlet 1 7/8 Tuned Headers 3" Inch System. Fast.
BrandPacemaker
Category: Extractors and headers
RRP $4418.00 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-57
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden V2
- Stock status
- Confirmed on order
The Pacemaker PP5363-57 is a set of 1-7/8in tuned headers with a 3in system, listed to fit the Holden 2001–2005 CV8 Monaro in single-outlet form. It is a tuned-length extractor design feeding a matched 3in run.
What are tuned headers and what do they change?
Headers, also called extractors, replace the cast factory exhaust manifolds with separate tubular runners off each cylinder. "Tuned" means the primary lengths are matched so the cylinders scavenge in step. The PP5363-57 uses 1-7/8in primaries feeding a 3in system. It changes the exhaust side of the Monaro's engine and works as part of the wider exhaust rather than as an internal part.
What does single-outlet, 3in mean here?
This version is the single-outlet layout, finishing in one tailpipe rather than two, and runs a 3in system behind the 1-7/8in primaries. The single-outlet detail matters because the dual-outlet CV8Z Monaro is listed separately. The figures to work from are the 1-7/8in primaries and the 3in system.
Will it suit my CV8 Monaro?
The PP5363-57 is listed to fit the Holden CV8 Monaro from 2001 to 2005 in single-outlet form. Because it names that year range and the single-outlet layout specifically, confirm your exact car with the workshop before ordering, since header fitment is sensitive to the precise variant.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits tuned headers like the PP5363-57 in-house across the Illawarra. The job needs good access to drop the factory manifolds, fresh gaskets, and the 3in single-outlet system lined up behind the extractors. Supplied by Pacemaker at $4,418.00 AUD; send us your Monaro's details and we'll confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the PP5363-57 fit?
- It is listed to fit the Holden 2001–2005 CV8 Monaro in single-outlet form. Confirm your exact car with the workshop before ordering.
- Is this the single or dual outlet version?
- This is the single-outlet version, with a 3in system; the dual-outlet CV8Z Monaro is listed separately.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.