Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-58
Holden 2001 - 2005 CV8 Monaro Single Outlet 1 7/8 Tuned Headers 3" Inch System With Rear
Holden 2001 - 2005 CV8 Monaro Single Outlet 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4094.98 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-58
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden V2
- Stock status
- Confirmed on order
Pacemaker PP5363-58 is built for the 2001–2005 CV8 Monaro in single-outlet form: tuned 1⁻₇⁄₈in headers with a 3in system supplied as rear-pipe-only. The single-outlet routing on the Monaro coupe body is what sets this SKU apart from the sedan and wagon listings.
What's specific about the CV8 Monaro fitment?
The Monaro is a two-door coupe, and this PP5363-58 listing is cut for the 2001–2005 CV8 in a single-outlet layout — the exhaust exits as one outlet rather than a dual arrangement. That routing under the coupe floorpan is different to a sedan or wagon, so the 3in pipework is shaped for it. Pacemaker lists it against the Holden CV8 Monaro; we verify on the car.
What does the rear-pipe-only build supply?
This is the without-muffler configuration: tuned headers and the 3in pipework to finish the rear section as a single outlet, with the muffler left to the owner. The 1⁻₇⁄₈in tuned-length primaries replace the factory cast manifold, giving each cylinder a matched runner into the collector. At a 3in system bore it's the larger of the system sizes in this family.
Is it road legal?
Tuned extractors aren't a catalytic converter or muffler, so the part itself holds no certified emissions device. On a 2001–2005 Monaro, compliance depends on the silencing you fit and how the whole system is signed off to NSW requirements — which we walk through per car. Pacemaker publishes no approval for the set and we won't imply one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits CV8 Monaro sets like this in-house across the Illawarra. We match PP5363-58 to your 2001–2005 Monaro, fit the headers and 3in single-outlet pipework, then tie in your muffler. Listed RRP is 4094.98 AUD; the fitting charge is quoted with the coupe on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Monaro is PP5363-58 for?
- The 2001–2005 CV8 Monaro, single-outlet, with a 3in rear-pipe-only system. Confirm your exact build with us first.
- Does it include a muffler?
- No — it's the rear-pipe-only configuration: tuned headers plus the 3in single-outlet pipework to complete the rear section.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.