Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-68
Holden VU and VY Series 1 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System With Rear
Holden VU and VY Series 1 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only (SKU: PP5363-68), $4059.53 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4059.53 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-68
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VU VX VY
- Stock status
- Confirmed on order
The Pacemaker PP5363-68 is a set of 1-7/8in tuned headers with a 3in system, listed to fit the Holden eight-cylinder ute. This is the rear-pipe-only configuration. The published RRP is $4059.53 AUD.
What does this kit cover?
This Pacemaker package combines 1-7/8in tuned headers with a 3in system for the Holden ute. It's the rear-pipe-only build, so it pairs the headers with the back section and leaves the mid-pipe to be matched on the car. The 1-7/8in figure is the primary tube size and the 3in number is the system pipe size; both come off the listing. It's listed for the V8 cars in this body. Headers are fitted with the engine in the car, so this is workshop work.
What are tuned headers and what do they change?
Headers, or extractors, replace the cast manifolds with individual tubes that merge in a tuned collector, letting each cylinder breathe through its own runner — which is why builders fit them on V8s like this. The 1-7/8in primary and 3in system are sized for a larger engine. They change exhaust flow and note versus the factory manifolds; we publish no power or sound figures, and the real result depends on the rest of the build and tune.
Will it suit my Holden ute?
It's listed to fit the Holden eight-cylinder ute; confirm the exact series and build with the workshop first, since header fitment is sensitive to body, driveline and any prior modifications. As the rear-pipe-only version, we'll check the mid-section already on the car so the join lines up. We verify against the car, not the part number alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker headers in-house across the Illawarra. A 1-7/8in set with a 3in system is a substantial job — working at the engine, lining up the collector and hanging the system clear of the floor. Send your Holden ute details and we'll confirm the build, the lead time on this Pacemaker line and book the bay. It's listed to fit rather than guaranteed for every variant.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5363-68 fit my Holden ute?
- It's listed to fit the Holden eight-cylinder ute. Header fitment varies with series and prior modifications, so confirm your exact build with Oak Flats Muffler Men before ordering.
- What does "rear pipe only" mean here?
- It pairs the 1-7/8in headers with the rear pipe section rather than a complete front-to-back system, so the mid-pipe is matched to your car. We'll confirm what you need on inspection.
- How much is it?
- The published RRP is $4059.53 AUD. As a heavier Pacemaker line it's typically a special-order item; we'll confirm price and lead time when you book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.