Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-69
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System With Rear
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only (SKU: PP5363-69), $4158.66 from Pacemaker.
BrandPacemaker
Category: Extractors and headers
RRP $4158.66 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-69
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
Pacemaker PP5363-69 is the later 5.7 V8 ute set — VY Series 2 and VZ — as rear-pipe-only: tuned 1⁻₇⁄₈in headers with a 3in system supplied without the muffler. The 5.7-litre VY2/VZ ute application is what separates it from the earlier-series and 6.0L ute listings.
Which ute does this fit?
PP5363-69 is listed for the VY Series 2 and VZ 5.7 V8 Holden ute. The late-model ute's routing differs from the Series 1 cars, so it carries its own listing with the 3in run shaped for that body. We treat the listing as listed-to-fit and confirm your build on the hoist.
What's the rear-pipe-only configuration?
This is the without-muffler build: tuned headers and the 3in pipework to finish the rear section, with the muffler left to the owner. It suits a 5.7 VY2/VZ ute being built with separately specified silencing. The 1⁻₇⁄₈in tuned-length primaries replace the factory cast manifold, giving each cylinder a matched-length runner into the collector.
Is it road legal?
These are tuned extractors, not a catalytic converter or muffler, so the part itself carries no certified emissions device. On a 5.7 ute, compliance depends on the silencing you fit and how the whole system is signed off to NSW requirements, which we go through per car. Pacemaker publishes no approval for the set and we won't imply one.
How does Oak Flats fit it?
Oak Flats Muffler Men fits VY2/VZ ute sets like this across the Illawarra. We match PP5363-69 to your 5.7 ute, fit the headers and 3in pipework, then tie in your muffler and check tray clearances. Listed RRP is 4158.66 AUD; the labour is quoted with the ute on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does PP5363-69 include a muffler?
- No — it's the rear-pipe-only configuration: tuned headers plus the 3in pipework to finish the rear section.
- Which engine and ute is it for?
- The VY Series 2 and VZ 5.7 V8 Holden ute. Confirm your exact variant with us before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.