Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-71
Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System
Pacemaker Holden VY Series 2 - VZ 5.7 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4481.69 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-71
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VY VZ
- Stock status
- Confirmed on order
The Pacemaker PP5363-71 is a set of 1-7/8in tuned headers with a 3in system, listed to fit the Holden eight-cylinder ute. This is the complete-system build. The published RRP is $4481.69 AUD.
What does this kit cover?
This Pacemaker package combines 1-7/8in tuned headers with a 3in system for the Holden ute. It's the full system configuration, pairing the 1-7/8in headers with the 3in pipework. The 1-7/8in figure is the primary tube size from the listing and the 3in number is the system pipe size. It's listed for the eight-cylinder cars in this body. Headers are fitted with the engine in the car, so this is workshop work rather than a bolt-on at home.
What are tuned headers and what do they change?
Headers, or extractors, swap the cast manifolds for individual tubes that merge in a tuned collector, so each cylinder breathes through its own runner — the reason builders fit them to V8s like this Holden. The 1-7/8in primary and 3in system are sized for a larger engine. They change exhaust flow and the engine's note against the factory manifolds; we publish no power or sound figures, and the real result depends on the rest of the build and tune.
Will it suit my Holden ute?
It's listed to fit the Holden eight-cylinder ute; confirm the exact series and build with the workshop first, since header fitment is sensitive to body, driveline and any prior modifications. As the full system, we'll still verify the headers land cleanly against your particular car. We verify against the car, not the part number alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker headers in-house across the Illawarra. A 1-7/8in set with a 3in system is a substantial job — working at the engine, lining up the collector and hanging the system clear of the floor. Send your Holden ute details and we'll confirm the build, the lead time on this Pacemaker line and book the bay. It's listed to fit, and we confirm the exact variant before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5363-71 fit my Holden ute?
- It's listed to fit the Holden eight-cylinder ute. Header fitment varies with series and prior modifications, so confirm your exact build with Oak Flats Muffler Men before ordering.
- What size is the system?
- The listing gives 1-7/8in primary tubes and a 3in system. This is the complete-system build rather than rear-pipe-only.
- How much is it?
- The published RRP is $4481.69 AUD. As a heavier Pacemaker line it's typically a special-order item; we'll confirm price and lead time when you book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.