Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-72
Holden VZ 6.0L 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System
Pacemaker Holden VZ 6.0L 8 Cylinder Ute 1 7/8 Tuned Headers 3" Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4580.81 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-72
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Pacemaker PP5363-72 is the complete 3in system for the 6.0L VZ ute: tuned 1⁻₇⁄₈in headers and the full system supplied together. It's the 6.0-litre ute listing in full-package form — distinct from the rear-pipe-only build of the same vehicle.
What does the full 3in system cover?
Unlike a rear-pipe-only kit, PP5363-72 is the complete build: tuned headers and the full 3in system for the 6.0L VZ ute, supplied as one matched run with the muffler included. It suits an owner replacing the whole engine-back exhaust in a single go. Pacemaker lists it against the Holden 6.0L ute; we confirm fitment on the vehicle.
What does the tuned header change?
It replaces the factory cast manifold with individual mandrel-bent 1⁻₇⁄₈in tuned-length runners that merge in the collector. On a 6.0L ute that's the headline engine-back restriction, and matching it to a complete 3in system keeps the bore consistent from the head right through the back of the tray rather than stepping between sections.
Is it road legal?
Tuned extractors aren't a catalytic converter or muffler, so the part itself holds no certified emissions device. Whether a 6.0L ute stays compliant depends on the complete system and how it's engineered to NSW requirements, which we cover per vehicle. Pacemaker publishes no approval for the set and we won't suggest one exists.
What does fitting involve in the Illawarra?
Oak Flats Muffler Men fits complete 6.0L ute systems like this in-house. We match PP5363-72 to your 6.0L VZ ute, fit the headers and full 3in system, and check tray and chassis clearances. Listed RRP is 4580.81 AUD; the fitting charge is quoted with the ute on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is PP5363-72 the full system?
- Yes — it's the complete package: tuned headers with the full 3in system for the 6.0L ute, muffler included.
- Which ute is it for?
- The 6.0L V8 VZ Holden ute. Confirm your exact build with us before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.