Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-80
Holden VT VX VY Series 1 8 Cylinder Wagon 1 7/8 Tuned Headers 3" Inch System With Rear
Holden VT VX VY Series 1 8 Cylinder Wagon 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4059.53 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-80
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VT VX VY
- Stock status
- Confirmed on order
Pacemaker PP5363-80 is the rear-pipe-only build of the VT–VY Series 1 V8 wagon set at the 3in system bore: tuned 1⁻₇⁄₈in headers with the 3in pipework supplied without the muffler. The without-muffler configuration paired with the larger 3in bore is what defines this SKU.
What does rear-pipe-only mean here?
PP5363-80 is the without-muffler configuration: tuned headers and the 3in pipework to complete the rear section, rather than a finished muffler assembly. It suits a VT–VY Series 1 wagon owner keeping or separately specifying their own silencing and wanting the header-and-pipe portion at the 3in bore. Pacemaker lists it against the Holden V8 wagon; we confirm on the car.
Why the wagon body listing?
A wagon's rear floor, load area and suspension pickups differ from a sedan, so the 3in pipe routing under the back of the car isn't interchangeable. Cutting PP5363-80 for the VT–VY Series 1 wagon means the run is shaped to that body. The 1⁻₇⁄₈in tuned-length primaries replace the factory cast manifold, giving each cylinder a matched runner before the collector.
Is it road legal?
Tuned extractors aren't a catalytic converter or muffler, so there's no certified emissions device in the part. Because this is a without-muffler build, what you run for the rear silencing and how the whole system is signed off to NSW requirements decides compliance, which we work through per car. Pacemaker publishes no approval and we won't imply one.
How do we fit it at Oak Flats?
Oak Flats Muffler Men assembles rear-pipe-only wagon sets like this across the Illawarra. We match PP5363-80 to your VT, VX or VY Series 1 wagon, fit the headers and 3in pipework, then tie in your muffler. Listed RRP is 4059.53 AUD; the labour is quoted with the car on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Does PP5363-80 include a muffler?
- No — it's the rear-pipe-only configuration: tuned headers plus the 3in pipework to complete the rear section.
- Which wagon is it cut for?
- The VT, VX and VY Series 1 V8 Holden wagon. Confirm your exact build with us first.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.