Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5363-82
Holden VZ 6.0L 8 Cylinder Wagon 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only
Holden VZ 6.0L 8 Cylinder Wagon 1 7/8 Tuned Headers 3" Inch System With Rear Pipe Only.
BrandPacemaker
Category: Extractors and headers
RRP $4257.79 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5363-82
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
Pacemaker PP5363-82 is the 6.0L VZ wagon set at the 3in system bore in rear-pipe-only form: tuned 1⁻₇⁄₈in headers with 3in pipework supplied without the muffler. The 6.0-litre engine listing paired with the larger 3in bore is the distinguishing combination here.
Why the 6.0L 3in listing?
PP5363-82 pairs the 6.0L V8 engine listing with the 3in system bore. The engine listing means the header flanges and runners are cut for the 6.0L; the body is the VZ wagon, so the 3in pipework is routed for the long-roof floorpan. Pacemaker lists it against the Holden 6.0L wagon; we confirm on the car.
What does the without-muffler build supply?
This is the rear-pipe-only configuration: tuned headers plus the 3in pipework to finish the rear section, with the muffler left to the owner. It suits a 6.0L VZ wagon being built with separately chosen silencing. The 1⁻₇⁄₈in tuned-length primaries replace the factory cast manifold, giving each cylinder a matched-length runner into the collector.
Is it road legal?
Tuned extractors aren't a catalytic converter or muffler, so the part itself holds no certified emissions device. With a 6.0L wagon, whether it stays compliant comes down to the muffler you fit and how the full system is signed off to NSW requirements, which we go through per vehicle. Pacemaker makes no approval claim for the set and we won't imply one.
How does Oak Flats fit it?
Oak Flats Muffler Men fits 6.0L VZ wagon sets like this across the Illawarra. We match PP5363-82 to your 6.0L wagon, fit the headers and 3in pipework, then tie in your muffler and confirm clearances. Listed RRP is 4257.79 AUD; the labour is quoted with the car on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What engine and bore is PP5363-82?
- The 6.0L V8 VZ wagon at the 3in system bore, supplied as rear-pipe-only with the tuned headers.
- Does it come with a muffler?
- No — it's the rear-pipe-only configuration, supplying the headers and 3in pipework to finish the rear section.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.