Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-06
Holden VZ 6.0L 8 Cylinder Try-Y Headers 2 1/2 Inch System
Holden VZ 6.0L 8 Cylinder Try-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4321.46 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-06
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden VZ
- Stock status
- Confirmed on order
The Pacemaker PP5367-06 is a tri-Y header set listed to fit the Holden VZ 6.0L V8. Its defining feature is the tri-Y merge layout — runners paired and merged in two stages rather than dumped straight into a single 4-into-1 collector — which broadens the torque character lower in the rev range.
Tri-Y vs 4-into-1 — what's the difference?
On a tri-Y header the eight runners pair up and merge in two steps before reaching the collector, instead of all four meeting at once. That staged merge tends to spread torque across a wider band and favour mid-range and street driveability, where a straight 4-into-1 leans toward peak power higher up. For a 6.0L VZ that spends most of its life on the road, the tri-Y layout is the more tractable of the two characters.
How does this set replace the factory manifolds?
Like any header set, the PP5367-06 swaps the VZ's restrictive cast exhaust manifolds for mandrel-formed tube runners that scavenge each cylinder more cleanly. The difference here is purely in how those runners are merged — the tri-Y arrangement — and in the system bore behind them. Pacemaker lists this set with a 2in system, so confirm the exact downstream sizing with us when you order.
Will it suit my VZ 6.0L?
This set is listed to fit the Holden VZ 6.0L V8, and the tri-Y design suits an owner after a broad, usable torque spread rather than a peaky top-end build. It's a fitment listing, not a guarantee — feed data can be imperfect — so treat it as listed to fit and confirm your exact variant with the workshop before committing.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker tri-Y header sets like the PP5367-06 in-house across the Illawarra. Send us your VZ's exact build and we'll confirm engine bay clearances and the system match before booking the bay. Pacemaker lists this set at an RRP of $4,321.46.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the point of a tri-Y design?
- The tri-Y merges runners in two stages instead of one, which tends to broaden the torque band and favour mid-range and street response over outright top-end peak. That's the main thing setting the PP5367-06 apart.
- Is the PP5367-06 listed for my Holden VZ?
- It's listed to fit the Holden VZ 6.0L V8. Confirm your exact variant with the workshop before ordering — the listing is a guide, not a guarantee.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.