Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" System (PP5381-61) at $4891.13 RRP
View partPP5367-07
Holden 2001 - 2005 CV8 Monaro Single Outlet Try-Y Headers 2 1/2 Inch System
Holden 2001 - 2005 CV8 Monaro Single Outlet Try-Y Headers 2 1/2 Inch System.
BrandPacemaker
Category: Extractors and headers
RRP $4222.34 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- PP5367-07
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Holden V2
- Stock status
- Confirmed on order
The Pacemaker PP5367-07 is a single-outlet Tri-Y header set with a 2-1/2in system, listed to fit the Holden Monaro (2001–2005). This is the complete-system configuration. The published RRP is $4222.34 AUD.
What does this kit cover?
This Pacemaker package pairs single-outlet Tri-Y headers with a 2-1/2in system for the 2001–2005 Holden Monaro. It's the full-system build rather than rear-pipe-only, combining the headers with the 2-1/2in pipework. The 2-1/2in figure is the system pipe size from the listing and the single-outlet layout is as described. Headers are fitted with the engine in the car, so this is workshop work.
What is a Tri-Y header and what does it change?
A Tri-Y header pairs the primary tubes before the final collector instead of running four-into-one. On a road coupe like the Monaro that's chosen for a broad spread of response rather than top-end only. It replaces the cast manifolds and changes exhaust flow and the engine's note; we publish no power or sound figures. The single-outlet, 2-1/2in setup is the configuration on this listing.
Will it suit my Holden Monaro?
It's listed to fit the Holden Monaro from 2001 to 2005; confirm the exact variant and build with the workshop first, because header fitment is sensitive to driveline and prior modifications. As the complete system we'll still verify the headers and 2-1/2in run suit your particular car. We verify against the car rather than the listing alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Pacemaker Tri-Y systems in-house across the Illawarra. On a Monaro that means landing the headers at the engine, then hanging the full 2-1/2in single-outlet system clear of the floor. Tell us your car's details and we'll confirm the build, the lead time on this Pacemaker line and book it in. It's listed to fit, and we confirm the exact variant before ordering.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the PP5367-07 fit my Holden Monaro?
- It's listed to fit the 2001–2005 Holden Monaro. Confirm your exact variant with Oak Flats Muffler Men before ordering, as header fitment varies with build.
- Is this the full system or rear pipe only?
- This is the complete-system build — Tri-Y headers with a single-outlet 2-1/2in system.
- How much is it?
- The published RRP is $4222.34 AUD. As a heavier Pacemaker line it's typically a special-order item; we'll confirm price and lead time when you book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II
PacemakerRRP$4891.13Holden Statesman WM - WN From Aug 2006 - Oct 2017 Series I And Series II fitted with 6.0 - 6.2 V8 1 3/4" 4 into 1 Headers 3" System.
View part
Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1
PacemakerRRP$4891.13Holden VE -VF Ute 2007-2017 6.0 Gen IV - 6.2 LS3 V8 1 3/4" 4 into 1 Headers 3" Ute System.
View part
Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Wagon July 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 1 3/4" 4 into 1 Headers 3" Wagon System (PP5381-69) at $4891.13 RRP.
View part
Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2
PacemakerRRP$4891.13Holden Commodore VE - VF Sedan Jul 2006 - Oct 2017 Gen IV 6.0 - LS3 6.2 V8 1 7/8" 4 into 1 Competition Headers 3" Sedan System (PP5382-51)
View part
Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned
PacemakerRRP$4891.13Holden VE -VF 8 Cylinder 6.0L / 6.2L Gen IV, LS2, LS3, Ute 1 7/8 Tuned Headers 3" Inch System.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.